To Next PageTo Next Page
Need help?Do you have a question about the Behringer NX3000D and is the answer not in the manual?
General| Amplifier class | D |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Built-in crossover | Yes |
| Audio output channels | - channels |
| Peak power per channel | 1500 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| RMS power output per channel (4 Ohm) | 900 W |
| Purpose | Performance/stage |
| Cooling type | Active |
| Product color | Black |
| Connectivity technology | Wired |
| Speakers connectivity type | XLR / 1⁄4\ |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power protection features | Overload |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 483 mm |
| Height | 94 mm |
| Weight | 3600 g |
Highlights key safety symbols and warnings for electrical hazards and proper usage.
Comprehensive list of safety guidelines for installation, operation, and maintenance.
Diagram illustrating a full band recording setup using amplifiers and audio sources.
Diagram showing a typical DJ setup connection for the NX1000D amplifier.
Steps for powering on the amplifier and sound source, and setting initial controls.
Explanation of bi-amping and the horizontal bi-amping setup.
Steps for configuring high and low frequency signals for bi-amping.
Explanation of vertical bi-amping and initial crossover setup.
Selecting BIAMP1 mode and configuring the subwoofer.
Configuring low-pass filter settings for channel B in bi-amping.
Specifications for output power, controls, and indicators.
Details on amplifier indicators and input sensitivity.
Specifications for the integrated DSP functions like delay, crossover, and EQ.
Specifications for input/output types, distortion, and frequency response.
Details on frequency response, damping factor, signal-to-noise, and circuit protection.
Information on power requirements, consumption, dimensions, and weight.
Specifications for NX3000, NX1000D, and NX1000 amplifier output power and controls.
Details on indicators and DSP features for NX3000, NX1000D, and NX1000 models.
