Behringer ULTRADRIVE PRO DCX2496 - Preset Storage and Management; Storing Presets to Internal Memory or Card; Deleting Presets and Formatting Cards; Copying Presets Between Banks

6. If the DCX2496 hardware was not found automatically, change the
“Communications Port” and click “?Search DCX2496s”.
TIPS:
- If you wish to use the RS-485 connection, it also appears as a COM port in the
“Communications Port” entry!
- If you wish to use the RS-485 connection, you need a true RS-485 card on your
computer! A standard network card (e.g. like those found in laptops) will not work
correctly (no RS-485 protocol!), even if the port connection looks similar!
7. Now you should see the following screen:
8. You have different “Synchronizing” options (identical to Example 1):
• Loading Presets and/or the current set from the DCX2496 to the PC:
o Select “Direction” DCX2496 -> PC
o Select the “Data” you wish to transfer (Current Set and/or Internal Presets
and/or Card Presets)
o Click “Synchronize” and wait until the transfer is complete
15