Behringer ULTRADRIVE PRO DCX2496 - Locking and Unlocking Presets; Audio Connections and Signal Handling

o Click “Return” to go back to the main editor
• Copying Presets and/or the current set from the PC to the DCX2496:
o Select “Direction” PC -> DCX2496
o Select the “Data” you wish to transfer (Current Set and/or Internal Presets
and/or Card Presets)
o Click “Synchronize” and wait until the transfer is complete
o Click “Return” to go back to the main editor
• If you just wish to edit the current preset remote-controlled from the PC, please
select the following icons/check boxes:
Then click “Synchronize” and wait until the transfer is complete
Then click “Return” to go back to the main editor
Please keep the “Stay Synchronized” box always active!
TIP: In the screenshot, the “DCX2496” has been renamed “My Main DCX #1.”
__________________________________________________________________________
16