11. Now you have the same “Synchronizing” options (per DCX2496 device) like in
“Examples 1 & 2” (see above)!
After selecting the “Direction” and “Data” settings, click “Synchronize” and “Return”
to go back to the main editor.
How to switch between first and second DCX2496 for PC editing
Let’s look at an example. Say you want to do the following:
a) edit the input A EQ curve of preset 19 at DCX2496 ID 1
and then
b) edit the input A EQ curve of preset 20 at DCX2496 ID 2
Preparation:
To check the correctness of changes on the DCX2496 displays, select IN A and then page
3/5 (“IN A -> EQ 3/5”) on both DCX2496s.
Then, RECALL on DCX2496#1 > internal preset 19 (“F1220”)
and on DCX2496#2 > internal preset 20 (“F1520”).
Procedure 1 (Edits on DCX2496 ID 1):
Now start on the PC:
19
To Next Page
Loading...
