1. Rename both DCX2496s to “First Device” (the DCX2496 with ID 1) and “Second
Device” (the DCX2496 with ID 2) by clicking on the text behind “Name.” This way, you
can easily identify both DCX2496s.
The individual names are stored on the DCX2496 hardware even after you power
them down, so these names will appear even when you start the remote software
again (even on a different computer).
2. Click on the “Connect” page on “First Device” in the left field “Recognized
Devices” (the background changes from grey to blue but, of course, the color doesn’t
matter)
3. Click “Return”
4. Select EQ page, IN A (on the left) and then “Quick Synchronize to DCX”
20
To Next Page
Loading...
