Behringer ULTRADRIVE PRO DCX2496 - Stereo Bi-Amp with Subwoofer and Monitor

23 ULTRADRIVE PRO DCX2496 User Manual
6.6 Stereo bi-amp operation plus subwoofer and additional monitor
XENYX X2222USB Mixing console
Monitor output
Right
Left
Stereo sub master
In A
Outputs: 1 2 3 4 5 6
In B In C
High (2)
High (4)
Left Right
Mid (3)
Mid (1)
Active mono subwoofer
EUROLIVE F1220A
Full Range mono monitor
In C signal
Low (5) SUM (A + B) signal
Fig. 6.6: Stereo 2-way operation plus subwoofer and additional monitor
Inputs A+B carry the stereo signal optimized for the two 2-way speakers. Thewoofer signal is derived from the sum signal of A+B, limited in its frequency range and
routed to the active sub-woofer. A separate signal from the mixing console (aux/subgroup) for a separate speaker can be processed via In C. In our example, this is a
full-range stage monitor with its own amplier able to play back a dedicated monitor mix for the singer, drummer or other performers.