Behringer X32 Core Connections & Overview Guide

Digital Mixers
It’s a “One-Rack Attack”! The X32 CORE
takes the brain of the agship X32 digital
mixing console and packs it all into a single
rack space. Combine the X32 CORE with our
S16 digital snakes to eortlessly run sound
with high I/O counts in multiple locations.
Dual AES50 networking CAT5 connectors
allow for up to 96 remote inputs and
48 output channels to be controlled from
and processed by X32 CORE. All of this can
be managed concurrently from various
locations and instances of our free control
software applications, XiQ, XiControl
and XControl.
Front Side Control
A set of front panel controls can
be pre-congured by the engineer
to enable a restricted amount of user
interaction, while hiding away all the
complexity. The rear panel expansion
port allows inserting optional I/O cards
to interface with existing networked
audio infrastructure.
At the Heart of it All
The X32 CORE forms the nucleus of an
ultra-exible studio control room setup
when paired with S16 I/O and P16 personal
monitoring systems in each tracking room.
The built-in 32 x 32 FireWire/USB recording
interface, 8 stereo eects engines,
zero-latency monitoring (independent
from DAW) and 100% total recall deliver
the tools to handle any project you dare
to tackle.
40-Input, 25-Bus Digital Rack
Mixer with AES50 Networked
Audio, USB Audio Interface and
iPad/iPhone* Remote Control
40-input channel, 25-bus, 1U
rack-mountable digital mixing core
for live and installed sound
application
48-channel Digital Snake ready**
via dual AES50 ports, featuring
KLARK TEKNIK’s SuperMAC
networking capability for ultra-low
jitter and latency
32 x 32 channel USB 2.0
audiointerface
iPad* and iPhone* apps for
professional remote operation
available free of charge—no host
PC required
2 TRS outputs for local monitoring
plus talkback mic input with trim
control and front panel
phones connector
Main LCR, 6 matrix buses and all
16 mix buses featuring inserts,
6-band parametric EQ’s and full
dynamics processing, plus 8 DCA
and 6 mute groups
Virtual FX rack featuring 8 true-
stereo FX slots include high-end
simulations such as Lexicon 480L*
and PCM70*, EMT250* and Quantec
QRS* etc.
Networked remote control for show
setups with on-screen software
editor via Ethernet
Powerful scene management
for convenient handling of
complex productions
USB type-A connector providing le
storage and uncompressed stereo
recordings plus show presets and
system updates
ULTRANET connectivity for
BEHRINGER’s P-16 Personal
Monitoring System**

Behringer X32 Core Specifications

Power

input voltage	100-240 V (50/60 Hz)
power consumption	120 W
phantom power	48 V

Audio Specifications

total harmonic distortion + noise	< 0.006% A-weighted
equivalent input noise level	-128 dBu
dynamic range (analog in to analog out)	106 dB

Input/Output Characteristics

input impedance XLR	5 kΩ / 10 kΩ unbalanced / balanced
output impedance XLR	75 Ω / 75 Ω unbalanced / balanced
non clip maximum input level XLR	+23 dBu

Weight and Dimensions

dimensions	19 x 12 x 17.24 inches, 483 x 307 x 438 mm
weight	7.9 lbs / 3.6 kg