X32 COMPACT DIGITAL MIXER User Manual
– Select either the channels 1-8, 9-16, 17-24,
25-32, Aux in 1-6/USB REC, E
ects Returns, Bus 1-8, or Bus 9-16.
ects Returns, Bus 1-8, or Bus 9-16.
currently active layer will light.
– Press this button to select an input or bus (depending which layer
is active) and allow it to be edited by the Channel Strip and Main Display.
– This displays the signal level of the input or bus
(depending which layer is active). The Gate and Comp LEDs light to indicate
that noise gate and/or compression are active.
– Press this button to send the channel to the Solo Bus.
– Information such as channel number,
source and graphical icon are displayed on this
– Press this button to mute the channel.
– Use this to adjust the channel volume or bus send in ’Sends on
Faders’ mode. The faders will automatically display the current status as
layers and functions are changed.
!"#$
!"%$
!"&$
!"'$
!"($
!")$
!""$
!"#$
!""$
!#%$ !#&$ !"'$
– These 6 controls adjust the parameters presented at the
bottom of the Main Display. The editable function will show a circular icon
in the display when continuous control is available. The function will show a
broad rectangular icon to indicate that a switch or toggle can be accessed by
– Some screens in the Main Display have more than
editable parameters which can be accessed by pressing the Layer Up or
– Use these to scroll through the available screens or
rm/decline certain actions.
– The main stereo output level is displayed here along
with the solo level of all channels whose Solo button is active.
– Press one of these buttons to jump directly to
the subject you wish to edit or con
- See Chapter 7 for detailed descriptions of each screen.
To Next Page
Loading...
