Behringer X32 - Page 64

64 X32 COMPACT DIGITAL MIXER User Manual
7.12 . 2 Assign Screen: Set A Tab
The “Set A” tab allows mapping of specic console parameters to the 8 assignable
buttons. Using this screen, the user can map the exact parameters that are most
useful to them to the desired controls, in the desired order.
To adjust the various settings on the set A tab, perform the following steps:
1. Adjust the 1st encoder to select the color used for the LCD screens within
that set.
1. Tap the 1st encoder to invert the text and background color.
2. Adjust the 2nd encoder to select which of the 8 assignable controls in
set A you wish to map a parameter to.
3. Adjust the 3rd encoder to scroll through a list of parameter categories
that the selected assignable control can be mapped to. Choices for the
buttonsinclude:
t Not Assigned
t Jump to Page
t Mute Channel
t Inserts
t Eect button
t MIDI
t Remote
Choices for the encoders include:
t Not Assigned
t Panorama
t Sends
t Dynamics
t FX Parameters
t MIDI
t Remote
4. Tap the 3rd encoder to assign the selected.
5. Adjust the 4th encoder to scroll through a list of parameters that can be
mapped to the currently selected assignable control.
6. Tap the 4th encoder to assign the selected parameter.
7. Adjust the 5th encoder to select from additional parameters that can be
mapped to the assignable controls.
Assign Screen: Set B Tab and Set C tabs
The Assign screen’s “Set B” and “Set C” tabs works as described above, but are
used to congure the set B and set C controls instead of the set A controls.