Behringer XENYX 1204USB Operating/Safety Instructions

XENYX1204USB / X1204USB • pg 24
www.behringer.com
EN
ES
FR
XENYX1204USB / X1204USB • pg 25
www.behringer.com
Important
information
Otros aspectos
importantes
Autres informations
importantes
Other important information
Register online.1. Please register your new
BEHRINGER equipment right after you purchase it by
visiting www.behringer.com. Registering your purchase
using our simple online form helps us to process your
repair claims more quickly and eciently. Also, read the
terms and conditions of our warranty, if applicable.
Malfunction.2. Should your BEHRINGER dealer
not be located in your vicinity, you may contact the
BEHRINGER distributor for your country listed under
“Support” at www.behringer.com. Should your country
not be listed, please check if your problem can be dealt
with by our “Online Support” which may also be found
under “Support” at www.behringer.com. Alternatively,
please submit an online warranty claim at
www.behringer.com BEFORE returning the product.
Fuse compartment/Voltage 3.
selection. Before plugging the unit into a power
socket, please make sure you are using the correct mains
voltage for your particular model. Some units feature a
fuse compartment that can be operated in two di erent
positions, allowing alternating between 230 V and 120 V.
Faulty fuses must be replaced with fuses of appropriate
rating without exception.
Registro online.1. Le recomendamos que
registre su nuevo aparato BEHRINGER justo después de su
compra accediendo a la página web www.behringer.com.
El registro de su compra a través de nuestro sencillo
sistema online nos ayudará a resolver cualquier
incidencia que se presente a la mayor brevedad posible.
Además, aproveche para leer los términos y condiciones
de nuestra garantía, si es aplicable en su caso.
Avería.2. Si su distribuidor BEHRINGER no
estuviera ubicado cerca de usted, puede ponerse en
contacto con el distribuidor de BEHRINGER para su
país, al cual podrá encontrar en la sección “Support” en
www.behringer.com. Si su país no aparece en el listado,
compruebe si su problema puede ser abordado con
nuestro “Online Support”, que también puede encontrar
en la sección “Support” en www.behringer.com. También
puede enviar una reclamación de la garantía en línea a
www.behringer.com ANTES de devolver el producto.
Compartimiento de fusibles/3.
Selección de voltaje. Antes de conectar la
unidad a una toma de alimentación, asegúrese de que
se esté utilizando el voltaje de corriente correcto para
su modelo en particular. Algunas unidades presentan
un compartimiento de fusibles que puede funcionar
en dos posiciones diferentes y permite alternar entre
230 V y 120 V. Los fusibles defectuosos sólo pueden ser
sustituidos por fusibles que presenten las características
nominales adecuadas.
Enregistrez-vous en ligne.1. Prenez le temps
d’enregistrer votre produit BEHRINGER aussi vite que
possible sur le site Internet www.behringer.com. Le fait
d’enregistrer le produit en ligne nous permet de gérer les
réparations plus rapidement et plus ecacement. Prenez
également le temps de lire les termes et conditions de
notre garantie.
Défaillance.2. Si aucun vendeur BEHRINGER
ne se trouve près de chez vous, contactez le
distributeur BEHRINGER de votre pays gurant dans la
liste de la page « Support » sur www.behringer.com.
Si votre pays n'y gure pas, rendez-vous sur la page
« Online Support », accessible également depuis la page
« Support » sur www.behringer.com, pour vérier si
votre problème peut y être pris en charge. Vous pouvez
également demander le bénéce de la garantie sur
www.behringer.com AVANT de renvoyer le produit.
Logement à fusible/sélection de 3.
la tension. Avant de brancher votre console
à une prise d'alimentation, vériez que la tension
d'alimentation de votre modèle est correcte. Certaines
consoles sont équipées d'un logement à fusible pouvant
fonctionner sur deux positions diérentes, permettant
ainsi de sélectionner 230 V ou 120 V. Remplacez
systématiquement tout fusible défectueux par un fusible
du calibre approprié.
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible party name: MUSIC Group Services USA, Inc.
Address: 18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.: Phone: +1 425 672 0816
Fax: +1 425 673 7647
XENYX 1204USB/X1204USB
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit dierent from that to which the •
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
XENYX 1204USB/X1204USB

Behringer XENYX 1204USB Specifications

General

Inputs	12
EQ	3-band
Phantom Power	Yes
USB Interface	Yes
FX Send	1
Type	Analog Mixer
Headphone Output	1
Mic Preamps	4
Faders	60mm