Behringer XENYX XL1600 - Specifications

26 XENYX XL3200/XL2400/XL1600 Quick Start Guide 27
Specications
XL3200 XL2400 XL1600
Equalizer
EQ Mono Channels
LOW 80Hz / ±15dB
HIGH MID 100Hz to 2kHz / ±15dB
LOW MID 400Hz to 8kHz / ±15dB
HIGH 12kHz / ±15dB
LOW CUT 80Hz, 12dB/oct.
EQ Stereo Channels
LOW 80Hz / ±15dB
LOW MID 300Hz / ±15dB
HIGH MID 3kHz / ±15dB
HIGH 12kHz / ±15dB
Channel Inserts
Type ¼" TRS jack, unbalanced
Max. input level +22dBu
AUX/MON Send
Type XLR connector, electronically balanced
Impedance approx. 75Ω
Max. output level +22dBu
FX Send
Type ¼" TRS jack, balanced
Impedance approx. 75Ω
Max. output level +22dBu
AUX/FX Returns
Type ¼" TRS jack, unbalanced
Impedance approx. 20kΩ
Max. input level +22dBu
Subgroup Outputs
Type ¼" TRS jack, unbalanced
Impedance approx. 75Ω
Max. output level +22dBu
Group Inserts
Type ¼" TRS jack, unbalanced
Max. output level +22dBu
Main Outputs A/B
Type XLR connector, electronically balanced
Impedance approx. 240Ω balanced, 120Ω unbalanced
Max. output level +25dBu
Main Inserts
Type ¼" TRS jack, unbalanced
Max. input level +22dBu
Speakers
Type ¼" TRS jack, unbalanced
Impedance approx. 75Ω
Max. output level +22dBu
Phones A/B Output
Type ¼" TRS jack, unbalanced
Max. output level +22dBu / 600Ω
XL3200 XL2400 XL1600
Mono Inputs
Microphone Inputs (XENYX Mic Preamp)
Type
XLR connector, electronically balanced,
discrete input circuit RF rejection lters
Mic E.I.N.
1
(20 Hz - 20 kHz)
@ 0Ω source resistance -127dB / 129.7dB A-weighted
@ 50Ω source resistance -126dB / 128.3dB A-weighted
@ 150Ω source resistance -125dB / 126.5dB A-weighted
Frequency Response
To Direct Out
<10Hz - 50kHz (-1dB)
<10Hz - 100kHz (-3dB)
To Insert Send
<10Hz - 90kHz (-1dB)
<10Hz - 170kHz (-3dB)
Gain range 0dB to +60dB
Max. input level +24dBu @0dB Gain
Impedance approx. 2.6kΩ balanced
Signal-to-noise ratio 120dB / 122dB A-weighted (0dBu In @ +22dB Gain)
Distortion (THD + N) typ. 0.0008%
Line Input
Type ¼" TRS jack, electronically balanced
Impedance approx. 20kΩ balanced, 10kΩ unbalanced
Gain range -10dB to +40dB
Max. input level +22dBu @ 0dB Gain
Channel Inserts
Type ¼" TRS jack, unbalanced
Max. input level +22dBu
Channel Direct Outs
Type ¼" TRS jack, balanced
Impedance approx. 75Ω balanced
Max. input level +22dBu
Crosstalk
2
Main fader closed 100dB
Channel muted 90dB
Channel fader muted 85dB
Frequency Response (Mic In
→
Main Out)
<20Hz - 20kHz +0dB / -1dB
<10Hz - 160kHz +0dB / -3dB
Stereo Inputs
Type 2 x ¼" TRS jack, balanced
Impedance approx. 20kΩ balanced, 10kΩ unbalanced
Gain range -20dB to +20dB
Max. input level +22dBu @ 0dB Gain
CD/Tape In
Type RCA connector
Impedance approx. 10kΩ
Max. input level +22dBu
XL3200 XL2400 XL1600
CD/Tape Output
Type RCA connector
Impedance approx. 1kΩ
Max. output level +15dBu
Main Mix System Data
3
(Noise)
Main mix @ -∞,
channel fader @ -∞
-110dB / -114dB A-weighted
Main mix @ 0dB,
channel fader @ -∞
-95dB / -98dB A-weighted
Main mix @ 0dB,
channel fader @ 0dB
-92dB / -95dB A-weighted
Power Supply
Power consumption 70 W 65 W 60 W
Fuse (100 - 240V~, 50/60Hz) T 2,0A H 250V
Mains connector Standard IEC receptacle
Physical/Weight
Dimensions (H x W x D)
7.1 x 21.3 x 35.8"
180 x 910 x 540 mm
7.1 x 21.3 x 27.8"
180 x 705 x 540 mm
7.1 x 21.3 x 19.5"
180 x 495 x 540 mm
Weight (net) 32.8 lbs / 14.9 kg 25.8 lbs / 11.7 kg 19.0 lbs / 8.6 kg
1) Equivalent Input Noise
2) Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain
3) 20 Hz - 20 kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix;
channels
¹
⁄
₃
as far left as possible; channels
²
⁄
₄
as far right as possible; reference = +6 dBu
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.