Beijer Electronics BoX2 base v2 - Introduction; Note, Tip and Important Icons; Trademarks

1. Introduction
BoX2 is a series of protocol converters, IIoT gateways and edge controllers that combine clever
connectivity with smart functions such as local data base storage, alarm servers, data exchange,
reporting, C# scripting, etc. BoX2 series is configured (except BoX2 pro motion) with iX Developer.
For BoX2 pro SC/BoX2 extreme SC, BCS Tools 3.50 or later is used to write the PLC program.
Please refer to the BoX2 Hardware and Installation manuals (with technical data as well as cutout
and outline dimensions) and iX Developer manuals for further information. All documentation is
available in our Download center.
1.1. Note, Tip and Important Icons
This publication may include Important and Note icons where appropriate to point out safety-related,
or other important, information. It may also include Tips to point out useful hints to the reader. The
corresponding symbols should be interpreted as follows:
NOTE
The Note icon alerts the reader to pertinent facts and conditions.
TIP
The Tip icon indicates advice on, for example, how to design your project or how to
use a certain function.
IMPORTANT
The Important icon highlights important information.
1.2. Trademarks
Microsoft, Windows, Windows Embedded CE 6.0 R3, Windows Embedded Compact 2013, Windows 7,
Windows Embedded Standard 7 are registered trademarks or trademarks of Microsoft Corporation
in the USA and/or other countries. Any additional trade names given in this documentation are
trademarks of their corresponding owners.
Introduction
Beijer Electronics, MAEN363 5 2023-06