What to do if my Beko WTK62053W Washer does not drain water?
If your Beko Washer isn't draining water, it could be due to the following reasons: * The water drain hose might be clogged or twisted. Clean or flatten the hose. * The pump filter is clogged. Clean the pump filter.
Why doesn't my Beko WTK62053W rinse well?
If your Beko Washer isn't rinsing well, consider these factors: * The amount, brand, and storage conditions of the detergent used are inappropriate. Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. * Detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. * The pump filter is clogged. Check the filter. * The drain hose is folded. Check the drain hose.
How to stop my Beko Washer from vibrating and making noise?
There are several reasons why your Beko Washer might be vibrating or making noise: * The machine might be standing unbalanced. Adjust the feet to level the machine. * A hard substance might have entered into the pump filter. Clean the pump filter. * Transportation safety bolts are not removed. Remove the transportation safety bolts. * Laundry quantity in the machine might be too little. Add more laundry to the machine. * The machine might be overloaded with laundry. Take out some of the laundry or distribute the load by hand to balance it. * The machine might be leaning on a rigid item. Make sure that the machine is not leaning on anything.
Why is my Beko WTK62053W Washer taking longer than the specified time?
Several factors can cause your Beko Washer to take longer than expected: * Low water pressure: The machine waits until it takes in an adequate amount of water, which extends the washing time. * Low voltage: Washing time is prolonged to avoid poor washing results. * Low water input temperature: The time to heat up the water extends in cold seasons. * Increased number of rinses: The machine increases the amount of rinse water or adds an extra rinsing step if necessary. * Excessive foam: Too much detergent usage can activate the automatic foam absorption system, prolonging the wash.
How to start a Beko Washer programme after closing the door?
If your Beko Washer programme doesn't start after closing the door: * Make sure you press the Start / Pause / Cancel button. * If the loading door is difficult to close, you might have loaded too much laundry. Reduce the amount of laundry and ensure the door is closed properly.
Why is the washing performance of my Beko WTK62053W Washer poor: stains persist or the laundry is not whitened?
Poor washing performance with stains persisting or laundry not whitening can be caused by: * Insufficient detergent. Use the recommended amount. * Overloading the machine. Do not load excessively, follow the programme table. * Incorrect programme and temperature selection. Choose the right settings. * Using the wrong type of detergent. Use original detergent appropriate for the machine. * Too much detergent is used. Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.
Why does too much foam form in my Beko WTK62053W?
Excessive foam in your Beko Washer can be due to: * Using improper detergents for the washing machine. Use appropriate detergents. * Using an excessive amount of detergent. Use only a sufficient amount. * Detergent stored improperly. Store detergent in a closed, dry location, not in excessively hot places. * Washing meshed laundry. Use smaller amounts of detergent for items like tulle. * Detergent put in the wrong compartment. Put the detergent in the correct compartment. * Softener being taken early. There may be problem in the valves or in the detergent dispenser. Call the Authorised Service Agent.
Why does laundry become stiff after washing in my Beko WTK62053W?
Laundry can become stiff after washing for these reasons: * Insufficient detergent is used. Use an appropriate amount of detergent according to the water hardness. * Detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. * Detergent might be mixed with the softener. Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
Why is there detergent residue in the detergent drawer of my Beko WTK62053W?
Detergent residue in the drawer could be due to: * Putting detergent in a wet drawer. Dry the detergent drawer before adding detergent. * Detergent has gotten damp. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. * Low water pressure. Check the water pressure. * Holes of the detergent compartment are blocked. Check the holes and clean if they are clogged. * There is a problem with the detergent drawer valves. Call the Authorised Service Agent. * Detergent might be mixed with the softener. Do not mix the softener with detergent. Wash and clean the dispenser with hot water. * Regular drum cleaning is not applied. Clean the drum regularly. For this, please see 4.7.2.
Why does laundry turn gray after washing in my Beko Washer?
If your laundry turns gray after washing, it might be due to: * Insufficient detergent used over a long period. Use the recommended amount. * Washing at low temperatures for a long time. Select the proper temperature. * Insufficient detergent with hard water. Use the recommended amount for hard water. * Too much detergent is used. Use the recommended amount of detergent appropriate for water hardness and the laundry.
General| Model | WTK62053W |
|---|---|
| Load Capacity | 6 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1200 rpm |
| Color | White |
| Noise Level Spinning | 76 dB |
| Number of Programs | 15 |
| Delay Start | Yes |
| Child Lock | Yes |
| Type | Front Load |
| Dimensions (H x W x D) | 84 cm x 60 cm x 44 cm |
To Next Page
