Beko WTK62054W User Manual

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Washing Machine

User Manual

WTK62054W

Document Number :

1911861833

_EN/ 08-06-22.(11:23)

Table of Contents

Questions and Answers:

T
Tina BradleyAug 21, 2025
How to open a locked door on a Beko WTK62054W?
- J
  Jill DeanAug 21, 2025
  If you can't open the loading door of your Beko Washer, it could be due to several reasons. The door lock might be activated because of the water level; drain the water by running the Pump or Spin programme. The machine might be heating water or at the spinning cycle; wait until the programme completes. If the child lock is engaged, wait a couple of minutes after the programme ends for deactivation. Lastly, the door may be stuck due to pressure; try pushing and pulling the door to release it.
C
Carl CamachoAug 23, 2025
What to do if my Beko Washer is leaking water from the bottom?
- J
  Jamie HowellAug 23, 2025
  If you notice water leaking from the bottom of your Beko Washer, the water drain hose might be clogged or twisted; clean or flatten it. Also, the pump filter could be clogged, so clean the pump filter.
K
Kevin HoodAug 25, 2025
Why won't my Beko WTK62054W Washer go into the spinning cycle?
- J
  jenniferwoodAug 25, 2025
  If your Beko Washer isn't spinning, there might be an unbalanced load; the automatic unbalanced load detection system may be activated. Also, the machine won't spin if water isn't drained completely, so check the filter and draining hose. Excessive foam could also be the issue, so use the recommended amount of detergent.
R
Ricardo ThompsonAug 27, 2025
What to do if my Beko WTK62054W programme doesn't start after closing the door?
- E
  Erin LoganAug 27, 2025
  If the programme on your Beko Washer doesn't start after closing the door, ensure you've pressed the Start / Pause / Cancel button. Also, if you've loaded too much laundry, it may be difficult to close the loading door properly; reduce the amount of laundry to resolve this.
R
Russell SolomonAug 28, 2025
Why does my Beko WTK62054W go into standby mode or not take in water?
- M
  Mercedes HernandezAug 28, 2025
  If your Beko Washer enters standby mode or doesn't take in water, check if the tap is turned on and turn it on if it’s off. Ensure the water inlet hose isn't bent and flatten it if it is. Clean the water inlet filter if it's clogged. Make sure the loading door is closed properly. Check the water connection and ensure water is supplied; if cut off, press the Start/Pause key to resume operation.
S
Samantha JuarezAug 29, 2025
Why is there detergent residue in my Beko WTK62054W drawer?
- J
  Jacob GreenAug 29, 2025
  If you find detergent residue in the drawer of your Beko Washer, dry the drawer before adding detergent. Ensure your detergents are stored closed in a humidity-free environment and not exposed to high temperatures. Check the water pressure. Also, inspect the holes of the detergent compartment for blockages. If there is a problem with the detergent drawer valves, call the Authorised Service Agent. Ensure detergent isn't mixed with softener, and clean the dispenser with hot water. Regular drum cleaning should be applied.
G
George GrayAug 31, 2025
Why is my Beko WTK62054W Washer vibrating and making noise?
- J
  Jessica GarciaAug 31, 2025
  If your Beko Washer is vibrating or making noise, several factors could be the cause. First, ensure the machine is standing level by adjusting the feet. A hard substance might have entered the pump filter, so clean it. Remove the transportation safety bolts if you haven't already. The laundry quantity might be too little, so add more, or the machine might be overloaded, so remove some. Also, make sure that the machine is not leaning on anything.
B
Bethany SharpSep 2, 2025
Why does my Beko Washer take so long to wash?
- A
  Amanda RodriguezSep 2, 2025
  Several factors can cause your Beko Washer to take longer than expected. Low water pressure can cause the machine to wait until it takes in enough water. Low voltage can prolong the washing time. A low input water temperature extends the time to heat the water. Also, the number of rinses or the amount of rinse water might have increased. Excessive foam can also activate the automatic foam absorption system, increasing wash time; use the recommended amount of detergent.
A
Alice SmithSep 3, 2025
How to reduce excessive foam in my Beko WTK62054W Washer?
- A
  Anthony MoranSep 3, 2025
  If too much foam is forming in your Beko Washer, you might be using improper detergents; use detergents appropriate for washing machines. Ensure you're using only a sufficient amount of detergent and that it's stored properly in a closed, dry location, away from excessive heat. Certain meshed laundry items may also cause excessive foaming, so use less detergent for them. Make sure the detergent is in the correct compartment. If softener is being taken early, there may be a problem in the valves or dispenser; consider calling an authorized service agent.
J
joshua74Sep 5, 2025
Why is my Beko Washer not cleaning stains properly?
- B
  Brittany GarciaSep 5, 2025
  If your Beko Washer isn't cleaning well and stains persist, make sure you're using enough detergent for the water hardness and laundry load. Avoid overloading the machine; load with recommended amounts. Check that you've selected the right programme and temperature. Use original detergent appropriate for the machine. Ensure you're not using too much detergent and put it in the correct compartment, avoiding mixing bleach with detergent.

Beko WTK62054W Specifications

General

Type	Freestanding
Capacity	6 kg
Energy Efficiency Class	A+++
Spin Speed	1200 rpm
Color	White
Noise Level Spinning	74 dB
Programs	15
Water Consumption	44 L

Summary

Getting Started

Explanation of Symbols

Clarifies symbols used throughout the manual for better understanding.

General Safety Instructions

Life and Property Safety

Guidelines to prevent injuries and damage to property.

Children's Safety

Safety measures for children interacting with the appliance.

Electrical Safety

Precautions for safe electrical connection and usage.

Hot Surface Safety

Warnings about potentially hot surfaces during operation.

Environmental and Usage Guidelines

WEEE Directive Compliance

Information on product compliance with WEEE for electronic waste.

Package Disposal

Guidance on proper disposal of packaging materials.

Intended Use

Specifies the intended domestic and commercial applications for the appliance.

Your Product

Product Overview

Identifies and describes the main components of the washing machine.

Package Contents

Lists all items included in the product's packaging.

Technical Specifications

Provides detailed technical data and specifications of the appliance.

Installation Guide

Step-by-step instructions for installing the washing machine correctly.

Preparation for Washing

Advice on sorting laundry and preparing it for washing.

Operating the Product

Comprehensive guide on using the washing machine's functions and programmes.

Maintenance and Cleaning

Procedures for regular cleaning and maintenance of the appliance.

Troubleshooting

Related product manuals

Preview: Beko WTK62051W

Preview: Beko WTK62053W

Preview: Beko WTK62041W

Preview: Beko WTK94121W

Preview: Beko WTK72041W

Preview: Beko WTK84151W

Preview: Beko WTK72041B

Preview: Beko WTK72012W

Preview: Beko WTK74011W

Preview: Beko WTK72041S

Preview: Beko WTK72042B