Why did my Beko WTK72042B stop shortly after the programme started?
If your Beko Washer stopped shortly after the program started, it might have stopped temporarily due to low voltage. The machine should resume running when the voltage returns to normal.
Why does my Beko WTK72042B directly discharges the water it takes in?
If your Beko Washer is directly discharging the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
Why is foam overflowing from the detergent drawer of my Beko WTK72042B Washer?
If foam is overflowing from the detergent drawer of your Beko Washer, it's likely that too much detergent was used. Try mixing 1 tablespoonful of softener with ½ liter of water and pour it into the main wash compartment of the detergent drawer. Also, ensure you are using the correct amount of detergent suitable for the programmes and maximum loads indicated in the “Programme and consumption table”, and reduce the amount of detergent when using additional chemicals like stain removers or bleaches.
To Next Page
General
