Beko WTL72051W User Manual (English)

Questions and Answers:

J
johnsonchristopherSep 5, 2025
Why is there detergent residue in my Beko Washer's drawer?
- V
  Victor GarciaSep 5, 2025
  Detergent residue in the drawer of your Beko Washer can occur if the drawer is wet when you add detergent, so dry the drawer first. Also, the detergent may have gotten damp, so keep detergents closed in a dry place. Low water pressure or blocked holes in the detergent compartment can also cause residue. Check the water pressure and clean the holes if they are clogged. There could also be a problem with the detergent drawer valves, or the detergent might be mixed with softener. In the first case, call the Authorised Service Agent. Finally, regular drum cleaning may be needed.
C
cynthiajimenezSep 7, 2025
Why is my laundry stiff after washing in my Beko Washer?
- K
  krausecynthiaSep 7, 2025
  Laundry can become stiff after washing in your Beko Washer if you're using too little detergent for the water hardness; use an appropriate amount. Also, ensure you're putting detergent in the correct compartment, not mixing it with softener. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. Don't mix softener with detergent; clean the dispenser with hot water.
K
Kenneth NelsonSep 8, 2025
Why are stains persisting after washing in my Beko WTL72051W?
- H
  hannah32Sep 8, 2025
  If stains persist or laundry isn't whitened after washing in your Beko Washer, you might not be using enough detergent; use the recommended amount. Also, avoid overloading the machine and select the correct programme and temperature. Ensure you're using the right type of detergent and putting it in the correct compartment, and don't mix bleach with detergent.
J
Jose MurphySep 9, 2025
Why does my Beko WTL72051W Washer immediately discharge the water it takes in?
- R
  Ricardo BoydSep 9, 2025
  If your Beko Washer immediately discharges the water it takes in, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.

Beko WTL72051W Specifications

General

Manual	Yes
Package depth	515 mm
Package width	650 mm
Package height	880 mm
Package weight	57000 g
Drum capacity	7 kg
Cycle time (max)	207 min
AquaStop function	-
Delay start (max)	9 h
Residual moisture	52 %
Spin-drying class	B
Maximum spin speed	1200 RPM
Noise level (spin)	74 dB
Noise level (wash)	57 dB
Adjustable temperature	No
Number of washing programs	15
Maximum water flow pressure	1000 kPa
Minimum water flow pressure	100 kPa
Cycle time (quick washing program)	28 min
Current	10 A
Connected load	2200 W
Power plug type	Type G
AC input voltage	230 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.5 W
Power consumption (left-on)	1 W
Water consumption per cycle	45 L
Energy consumption washing per cycle	0.685 kWh
Energy efficiency index (EU 2017/1369)	1.04
Feet adjustment	15 mm
Door hinge	Left
Motor type	Brushless
Water fill	Cold
Control type	Rotary
Loading type	Front-load
Drum material	Stainless steel
Product color	White
Inlet hose length	1.3 m
Door opening angle	170 °
Appliance placement	Freestanding
Hose diameter	20 mm
Washing class	A
Required tools	Standard tool box
Paper packaging weight	10 g
Plastic packaging weight	140 g
Harmonized System (HS) code	84501190
Expanded Polystyrene (EPS) packaging weight	813 g