Beko WTX81432WI User Manual

Beko WTX81432WI

48 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Lavatrice

Manuale utente

Washing Machine

User Manual

WTX81432WI

IT / EN

2820525927_IT/ 19-12-19.(11:39)

Numero del documento :

Table of Contents

Questions and Answers:

V
vickie88Aug 31, 2025
What to do if Beko WTX81432WI Washer enters standby mode or does not take in water?
- J
  James HarrisonAug 31, 2025
  If your Beko Washer enters standby mode or doesn't take in water, first, ensure the tap is turned on. Check if the water inlet hose is bent and flatten it if necessary. Clean the water inlet filter if it's clogged. Make sure the loading door is closed properly. Finally, verify the water connection and ensure water isn't cut off; if it was, press Start/Pause to resume once the water supply is restored.
T
Tyler SchwartzAug 30, 2025
Why is my Beko Washer vibrating or making noise?
- C
  Charles GardnerAug 30, 2025
  If your Beko Washer is vibrating excessively or making unusual noises, several factors could be at play. First, ensure the machine is level by adjusting the feet. Check the pump filter for any hard objects. Remove the transportation safety bolts if you haven't already. The laundry load might be too small, so consider adding more items. Conversely, the machine could be overloaded, requiring you to remove some items or redistribute the load evenly. Finally, confirm that the machine isn't leaning against anything.
R
Robert OwensAug 29, 2025
Why does my Beko WTX81432WI not rinse well?
- A
  audreytrujilloAug 29, 2025
  If your Beko Washer does not rinse well, the amount, brand, and storage conditions of the detergent might be inappropriate. Use a detergent suitable for washing machines and your laundry, and store it properly. Ensure the detergent is placed in the correct compartment. Check if the pump filter or the drain hose is clogged or folded, and clean or unfold them as needed.
P
phamjenniferAug 27, 2025
Why won't my Beko WTX81432WI Washer switch to spinning step?
- M
  michaelgomezAug 27, 2025
  If your Beko Washer machine does not switch to the spinning step, it could be due to an unbalanced load; the automatic unbalanced load detection system might be activated. Also, the machine won't spin if water isn't completely drained, so check the filter and drain hose. Excessive foam from too much detergent can also prevent spinning; use the recommended amount of detergent.
D
Desiree ColeAug 26, 2025
Why can't I start or select a programme on my Beko Washer?
- X
  Xavier DouglasAug 27, 2025
  If your Beko Washer programme cannot be started or selected, the machine may have entered self-protection mode due to a supply problem, such as line voltage or water pressure issues. To cancel the current programme, turn the Programme Selection knob to another programme. This will cancel the previous selection.
A
Anthony ChenAug 25, 2025
Why is there water leaking from the bottom of my Beko Washer?
- E
  ealexanderAug 25, 2025
  If water is leaking from the bottom of your Beko Washer, inspect the water drain hose for clogs or twists and clean or flatten it. Also, check the pump filter for any blockages and clean it if necessary.
T
tgarciaAug 23, 2025
What to do if my Beko WTX81432WI Washer does not drain water?
- C
  Courtney WhiteAug 23, 2025
  If your Beko Washer isn't draining water, the drain hose might be clogged or twisted; try cleaning or flattening it. Alternatively, the pump filter could be clogged; clean the pump filter to resolve this issue.

Beko WTX81432WI Specifications

General

Type	Front load
Capacity	8 kg
Spin Speed	1400 rpm
Energy Efficiency Class	A+++
Color	White
Programs	15

Related product manuals

Preview: Beko WTX61031W

Preview: Beko WTX91032W

Preview: Beko WTX61032W

Preview: Beko WTX71232W

Preview: Beko WTX71232WI

Beko WTX71232WI

Preview: Beko WTX91232WI

Beko WTX91232WI

Preview: Beko WTXS61232WI

Beko WTXS61232WI

Preview: Beko WTX91486AI-IT

Beko WTX91486AI-IT

Beko WTX101486AI-IT

Preview: Beko WTB820E1W

Preview: Beko WTIK74111