EasyManua.ls Logo

Beko WTX61032W - User Manual

Beko WTX61032W
60 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2820525917_IT / 17-06-17.(11:07)
Lavatrice
Manuale utente
WTX61032W
IT / EN
Numero del documento=
Washing Machine
User’s Manual

Table of Contents

Questions and Answers

  • F
    Frederick WileyAug 15, 2025
    What to do if my Beko WTX61032W Washer does not drain water?
    • S
      Scott SmithAug 15, 2025
      If your Beko Washer doesn't drain water, the water drain hose might be clogged or twisted, so you should clean or flatten the hose. Also, the pump filter might be clogged, so you should clean the pump filter.
  • K
    Karen OrtegaAug 18, 2025
    Why is there water leaking from the bottom of my Beko WTX61032W Washer?
    • J
      Joanne RichmondAug 19, 2025
      If water is leaking from the bottom of your Beko washing machine, it could be due to a clogged or twisted water drain hose. Clean or flatten the hose to resolve this. Alternatively, the pump filter might be clogged, so clean the pump filter.
  • S
    Sandra HansenAug 21, 2025
    Why does my Beko Washer not rinse well?
    • C
      Cassandra DuncanAug 21, 2025
      If the Beko Washer does not rinse well, it could be due to: * The amount, brand, and storage conditions of the detergent used are inappropriate. Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. * Detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, the machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. * The pump filter is clogged. Check the filter. * The drain hose is folded. Check the drain hose.
  • W
    Willie GarzaAug 25, 2025
    How to start a Beko WTX61032W Washer program after closing the door?
    • M
      Mary LyonsAug 25, 2025
      If the program on your Beko Washer doesn't start after closing the door, make sure you press the Start / Pause / Cancel button. Also, if the loading door is difficult to close due to excessive laundry, reduce the amount of laundry to ensure the door closes properly.
  • V
    vjonesAug 27, 2025
    Why does my laundry not smell like the softener after using my Beko WTX61032W?
    • K
      kevincurtisAug 27, 2025
      If laundry does not smell like the softener after washing in your Beko Washer, it could be because: * Detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment. * Detergent might be mixed with the softener. Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
  • M
    Miranda AndersonAug 30, 2025
    Why is my Beko WTX61032W Washer vibrating so much?
    • T
      Tracey JonesAug 30, 2025
      The Beko Washer might vibrate or make noise due to several reasons: * The machine might be standing unbalanced. Adjust the feet to level it. * A hard substance might have entered the pump filter. Clean the pump filter. * Transportation safety bolts are not removed. Remove them. * Laundry quantity in the machine might be too little. Add more laundry. * The machine might be overloaded. Remove some laundry or distribute the load evenly. * The machine might be leaning on something. Ensure it's not.
  • R
    Richard HopkinsSep 2, 2025
    Why did my laundry become stiff after washing in my Beko WTX61032W?
    • H
      hughesmichaelSep 2, 2025
      If your laundry became stiff after washing in the Beko Washer, it could be due to several reasons: * Using an insufficient amount of detergent for the water hardness. Use an appropriate amount of detergent according to the water hardness. * Putting detergent in the wrong compartment. Put the detergent in the correct compartment. * Mixing detergent with softener. Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
  • S
    Stacey Stevens MDSep 5, 2025
    Why did the colour of my clothes fade after washing in my Beko WTX61032W?
    • B
      Brandon Baldwin MDSep 5, 2025
      If the colour of clothes faded after washing in your Beko Washer, it could be due to: * Excessive laundry loaded in the machine. Do not overload the machine. * Damp detergent. Keep detergents closed in a humidity-free environment and do not expose them to excessive temperatures. * A higher temperature selected. Select the proper programme and temperature according to the type and soiling degree of the laundry.
  • E
    Earl PerrySep 8, 2025
    Why does my Beko WTX61032W Washer directly discharge the water it takes in?
    • L
      Lauren SullivanSep 8, 2025
      If your Beko Washer discharges the water it takes in directly, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
  • S
    sarahdickersonSep 12, 2025
    Why do my clothes smell unpleasantly after washing with my Beko WTX61032W Washer?
    • S
      Sean JonesSep 12, 2025
      If clothes smell unpleasantly after washing in your Beko Washer, odours and bacteria layers may have formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes. Leave the detergent drawer as well as the loading door of the machine ajar after each washing to prevent a humid environment favorable for bacteria.

Beko WTX61032W Specifications

General IconGeneral
BrandBeko
ModelWTX61032W
CategoryWasher
LanguageEnglish

Related product manuals