EasyManua.ls Logo

Beko WTX81432WI - User Manual

Beko WTX81432WI
48 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Lavatrice
Manuale utente
Washing Machine
User Manual
WTX81432WI
IT / EN
2820525927_IT/ 19-12-19.(11:39)
Numero del documento :

Table of Contents

Questions and Answers

  • A
    anthony14Sep 23, 2025
    Why do my clothes smell unpleasantly after washing in my Beko WTX81432WI Washer?
    • F
      fishersamanthaSep 23, 2025
      If your clothes smell unpleasantly after being washed in your Beko Washer, it is because odours and bacteria layers have formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes. Leave the detergent drawer as well as the loading door of the machine ajar after each washing, so that a humid environment favorable for bacteria cannot occur in the machine.
  • T
    tgarciaAug 23, 2025
    What to do if my Beko WTX81432WI Washer does not drain water?
    • C
      Courtney WhiteAug 23, 2025
      If your Beko Washer isn't draining water, the drain hose might be clogged or twisted; try cleaning or flattening it. Alternatively, the pump filter could be clogged; clean the pump filter to resolve this issue.
  • A
    Anthony ChenAug 25, 2025
    Why is there water leaking from the bottom of my Beko Washer?
    • E
      ealexanderAug 25, 2025
      If water is leaking from the bottom of your Beko Washer, inspect the water drain hose for clogs or twists and clean or flatten it. Also, check the pump filter for any blockages and clean it if necessary.
  • D
    Desiree ColeAug 26, 2025
    Why can't I start or select a programme on my Beko Washer?
    • X
      Xavier DouglasAug 27, 2025
      If your Beko Washer programme cannot be started or selected, the machine may have entered self-protection mode due to a supply problem, such as line voltage or water pressure issues. To cancel the current programme, turn the Programme Selection knob to another programme. This will cancel the previous selection.
  • P
    phamjenniferAug 27, 2025
    Why won't my Beko WTX81432WI Washer switch to spinning step?
    • M
      michaelgomezAug 27, 2025
      If your Beko Washer machine does not switch to the spinning step, it could be due to an unbalanced load; the automatic unbalanced load detection system might be activated. Also, the machine won't spin if water isn't completely drained, so check the filter and drain hose. Excessive foam from too much detergent can also prevent spinning; use the recommended amount of detergent.
  • J
    julian18Sep 17, 2025
    Why is there too much foam forming in my Beko WTX81432WI Washer?
    • V
      vbartlettSep 18, 2025
      If too much foam is forming in your Beko Washer, ensure you are using detergents specifically designed for washing machines. Using excessive amounts of detergent can also cause this issue, so use only the necessary amount. Improper storage of detergent can also contribute, so store it in a closed, dry location away from excessive heat. Some meshed laundry items like tulle can create excessive foam, so use less detergent for these items. Make sure the detergent is placed in the correct compartment. If softener is being taken early, there may be a problem in the valves or in the detergent dispenser. Call the Authorised Service Agent.
  • J
    janearnoldSep 14, 2025
    Why did the laundry become stiff after washing in my Beko WTX81432WI?
    • D
      Daniel LeeSep 14, 2025
      If your laundry became stiff after washing in your Beko Washer, it could be due to using too little detergent for the water hardness; use the appropriate amount. Also, ensure detergent isn't put in the wrong compartment, as it can interfere with the rinsing or softener step. Avoid mixing softener with detergent, and clean the dispenser with hot water.
  • D
    Dorothy MartinSep 15, 2025
    Why doesn't my laundry smell like the softener after washing in my Beko WTX81432WI Washer?
    • R
      Riley LiuSep 15, 2025
      If your laundry doesn't smell like softener after washing in your Beko Washer, it might be because the detergent is put in the wrong compartment, interfering with the rinsing or softener step. Also, avoid mixing the softener with the detergent. Wash and clean the dispenser with hot water and put the detergent in the correct compartment.
  • J
    jeffery07Sep 6, 2025
    Why does washing take longer than specified on my Beko WTX81432WI?
    • W
      William ValdezSep 6, 2025
      If your Beko Washer is taking longer than expected, it could be due to several reasons. Low water pressure can cause the machine to wait until it has enough water, extending the wash time. Low voltage can also prolong the washing time to ensure good results. Cold water input temperatures require more time to heat the water. Additionally, the machine may increase the amount of rinse water or add an extra rinse if needed. Excessive foam from too much detergent can also activate the automatic foam absorption system, lengthening the cycle.
  • C
    Christopher GraySep 3, 2025
    Why does laundry remain wet at the end of the programme on my Beko WTX81432WI Washer?
    • P
      Peter MercadoSep 3, 2025
      If laundry remains wet at the end of the programme in your Beko Washer, it might be due to excessive foam triggering the automatic foam absorption system because too much detergent was used. Use the recommended amount of detergent to avoid this issue.

Beko WTX81432WI Specifications

General IconGeneral
TypeFront load
Capacity8 kg
Spin Speed1400 rpm
Energy Efficiency ClassA+++
ColorWhite
Programs15

Related product manuals