Beko WTX81232WI - User Manual

Beko WTX81232WI

60 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

2820525927_IT / 16-06-17.(8:11)

Lavatrice

Manuale utente

WTX81232WI

IT / EN

Numero del documento=

Washing Machine

User’s Manual

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Beko WTX81232WI o

cerca il tuo prodotto tra le migliori offerte di Lavatrici e Asciugatrici

Table of Contents

Questions and Answers

D
dominiqueharmonSep 23, 2025
Why do my clothes smell unpleasantly after washing in my Beko WTX81232WI Washer?
- A
  Andrea JamesSep 23, 2025
  If your clothes smell unpleasantly after being washed in your Beko Washer, it is because odours and bacteria layers have formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes. Leave the detergent drawer as well as the loading door of the machine ajar after each washing, so that a humid environment favorable for bacteria cannot occur in the machine.
V
Victor WashingtonAug 23, 2025
What to do if my Beko WTX81232WI does not drain water?
- D
  Diane JohnsonAug 23, 2025
  If your Beko Washer isn't draining water, the drain hose might be clogged or twisted; try cleaning or flattening it. Alternatively, the pump filter could be clogged; clean the pump filter to resolve this issue.
L
Logan WilliamsAug 25, 2025
Why is there water leaking from the bottom of my Beko Washer?
- B
  Briana HughesAug 25, 2025
  If water is leaking from the bottom of your Beko Washer, inspect the water drain hose for clogs or twists and clean or flatten it. Also, check the pump filter for any blockages and clean it if necessary.
R
Ricky WangAug 26, 2025
Why can't I start or select a programme on my Beko WTX81232WI Washer?
- B
  Brian BryantAug 27, 2025
  If your Beko Washer programme cannot be started or selected, the machine may have entered self-protection mode due to a supply problem, such as line voltage or water pressure issues. To cancel the current programme, turn the Programme Selection knob to another programme. This will cancel the previous selection.
J
James ThomasAug 27, 2025
Why won't my Beko Washer switch to spinning step?
- N
  Nicholas WatkinsAug 27, 2025
  If your Beko Washer machine does not switch to the spinning step, it could be due to an unbalanced load; the automatic unbalanced load detection system might be activated. Also, the machine won't spin if water isn't completely drained, so check the filter and drain hose. Excessive foam from too much detergent can also prevent spinning; use the recommended amount of detergent.
E
evansnicholasSep 17, 2025
Why is there too much foam forming in my Beko WTX81232WI Washer?
- M
  Melissa DeleonSep 17, 2025
  If too much foam is forming in your Beko Washer, ensure you are using detergents specifically designed for washing machines. Using excessive amounts of detergent can also cause this issue, so use only the necessary amount. Improper storage of detergent can also contribute, so store it in a closed, dry location away from excessive heat. Some meshed laundry items like tulle can create excessive foam, so use less detergent for these items. Make sure the detergent is placed in the correct compartment. If softener is being taken early, there may be a problem in the valves or in the detergent dispenser. Call the Authorised Service Agent.
L
lhuynhSep 14, 2025
Why did the laundry become stiff after washing in my Beko WTX81232WI?
- L
  lbrownSep 14, 2025
  If your laundry became stiff after washing in your Beko Washer, it could be due to using too little detergent for the water hardness; use the appropriate amount. Also, ensure detergent isn't put in the wrong compartment, as it can interfere with the rinsing or softener step. Avoid mixing softener with detergent, and clean the dispenser with hot water.
S
Sheila NguyenSep 15, 2025
Why doesn't my laundry smell like the softener after washing in my Beko WTX81232WI?
- T
  Tina CollinsSep 16, 2025
  If your laundry doesn't smell like softener after washing in your Beko Washer, it might be because the detergent is put in the wrong compartment, interfering with the rinsing or softener step. Also, avoid mixing the softener with the detergent. Wash and clean the dispenser with hot water and put the detergent in the correct compartment.
G
Greg WatsonSep 6, 2025
Why does washing take longer than specified on my Beko WTX81232WI Washer?
- H
  heather46Sep 6, 2025
  If your Beko Washer is taking longer than expected, it could be due to several reasons. Low water pressure can cause the machine to wait until it has enough water, extending the wash time. Low voltage can also prolong the washing time to ensure good results. Cold water input temperatures require more time to heat the water. Additionally, the machine may increase the amount of rinse water or add an extra rinse if needed. Excessive foam from too much detergent can also activate the automatic foam absorption system, lengthening the cycle.
M
munozdebraSep 3, 2025
Why does laundry remain wet at the end of the programme on my Beko WTX81232WI?
- J
  Joan GallagherSep 3, 2025
  If laundry remains wet at the end of the programme in your Beko Washer, it might be due to excessive foam triggering the automatic foam absorption system because too much detergent was used. Use the recommended amount of detergent to avoid this issue.

Beko WTX81232WI Specifications

General

Brand	Beko
Model	WTX81232WI
Category	Washer
Language	English

Related product manuals

Preview: Beko WTX81432WI

Beko WTX81432WI

Preview: Beko WTX81436AD-IT

Beko WTX81436AD-IT

Preview: Beko WTX61031W

Preview: Beko WTX71232W

Preview: Beko WTX61032W

Preview: Beko WTX71031W

Preview: Beko WTXS51022W

Beko WTXS51022W

Preview: Beko WTX91232WI

Beko WTX91232WI

Preview: Beko WTX71232WI

Beko WTX71232WI

Preview: Beko WTXS61032W

Beko WTXS61032W

Preview: Beko WTX91486AI-IT

Beko WTX91486AI-IT