EasyManua.ls Logo

Beko WTX71031W - User Manual

Beko WTX71031W
56 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2820525923_IT / 17-09-18.(14:00)
Lavatrice
Manuale utente
WTX71031W
IT / EN
Numero del documento=
Washing Machine
User’s Manual

Table of Contents

Questions and Answers

  • M
    Michelle CampbellSep 9, 2025
    Why is there too much foam in my Beko WTX71031W?
    • K
      Katherine BarnesSep 9, 2025
      If your Beko Washer has too much foam, improper detergents may be in use. Use detergents appropriate for washing machines. You may be using too much detergent; use only a sufficient amount. The detergent might have been stored improperly; store it in a closed, dry location, away from excessive heat. Some meshed laundry, like tulle, may foam excessively; use smaller amounts of detergent for these items. Ensure the detergent is placed in the correct compartment.
  • D
    davidsonjohnAug 23, 2025
    How to open the loading door of my Beko WTX71031W?
    • D
      Darrell AndrewsAug 23, 2025
      If your Beko Washer's loading door cannot be opened, the door lock may be activated due to the water level. Try draining the water by running the Pump or Spin programme. The machine might be heating water or spinning; wait until the programme completes. The child lock could be engaged; wait a couple of minutes after the programme ends for deactivation. The door might be stuck due to pressure; grab the handle and push and pull to release it.
  • B
    Brenda Williams PhDAug 25, 2025
    Why is my Beko washing machine leaking water from the bottom?
    • A
      Anna WhiteAug 25, 2025
      If you see water leaking from the bottom of your Beko washing machine, the water drain hose might be clogged or twisted. Clean or flatten the hose. Alternatively, the pump filter could be clogged, so clean the pump filter.
  • D
    Danielle MorenoAug 27, 2025
    What to do if my Beko WTX71031W Washer enters standby mode or doesn't take in water?
    • L
      Lawrence SuarezAug 27, 2025
      If your Beko Washer enters standby mode or doesn't take in water, check if the tap is turned on. Also, ensure the water inlet hose isn't bent; flatten it if it is. The water inlet filter might be clogged, so clean it. Make sure the loading door is closed. If the water connection is wrong or water is cut off, check the connection and press the Start/Pause key after the water supply resumes to continue from standby mode.
  • D
    David NielsenAug 27, 2025
    Why doesn't my Beko Washer rinse well?
    • T
      thomasbergAug 28, 2025
      If your Beko Washer doesn't rinse well, the issue could be the amount, brand, or storage conditions of your detergent. Use a detergent appropriate for the washing machine and your laundry, and store it properly in a humidity-free environment, away from excessive temperatures. Ensure the detergent is put in the correct compartment. Also, check the pump filter and drain hose for clogs or folds.
  • F
    Frank FosterAug 29, 2025
    Why doesn't my Beko WTX71031W switch to the spinning step?
    • E
      Edward VillarrealAug 29, 2025
      If your Beko Washer is not switching to the spinning step, there might be an unbalanced load. The automatic unbalanced load detection system may be activated due to uneven laundry distribution in the drum. Also, the machine won't spin if water isn't completely drained, so check the filter and drain hose. Excessive foam from too much detergent can also prevent spinning; use the recommended amount of detergent.
  • N
    Norma JohnsonSep 18, 2025
    Why doesn't my laundry smell like the softener after washing in my Beko WTX71031W?
    • R
      Robert YoungSep 18, 2025
      If your laundry doesn't smell like the softener after washing in your Beko Washer, ensure detergent isn't placed in the wrong compartment. If detergent is put in the prewash compartment although a prewash cycle isn't selected, the machine can take this detergent during rinsing or softener step. Also, do not mix the softener with detergent and wash and clean the dispenser with hot water. Put the detergent in the correct compartment.
  • M
    Melissa DavisSep 18, 2025
    Why is there detergent residue in the detergent drawer of my Beko WTX71031W?
    • S
      Stephanie WalkerSep 22, 2025
      If there's detergent residue in the detergent drawer of your Beko Washer, ensure the drawer is dry before adding detergent. The detergent may have gotten damp; keep detergents closed in a humidity-free environment and avoid excessive temperatures. Check the water pressure. If the detergent in the main wash compartment got wet while taking in prewash water, the holes of the detergent compartment may be blocked; check and clean them if clogged. Avoid mixing softener with detergent, and clean the dispenser with hot water. If there is a problem with the detergent drawer valves, call the Authorised Service Agent.
  • S
    Shirley ParsonsSep 8, 2025
    Why does my Beko WTX71031W Washer directly discharge the water it takes in?
    • C
      Caitlin SnyderSep 8, 2025
      If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
  • V
    Victor MooreSep 4, 2025
    Why is the washing performance poor and laundry turns gray in my Beko Washer?
    • J
      Jesse MillerSep 5, 2025
      If the washing performance of your Beko Washer is poor and laundry turns gray, you may not be using enough detergent over a long period. Use the recommended amount for your water hardness and laundry. Washing at low temperatures for too long can also cause this; select the proper temperature. Insufficient detergent with hard water can also lead to graying. Using too much detergent, overloading the machine, selecting the wrong program and temperature, or using the wrong type of detergent can also contribute. Be sure to use an original detergent appropriate for the machine.

Summary

General Safety Instructions

Life and Property Safety

Safety guidelines to prevent injuries and material damage risks.

Childrens Safety

Safety guidelines for children using the appliance and handling packaging.

Electrical and Hot Surface Safety

Electrical Safety

Safety precautions related to electrical connections and usage.

Hot Surface Safety

Warning about hot surfaces during operation and keeping children away.

Environmental Information

WEEE Directive Compliance

Information on the WEEE Directive and recycling of electrical equipment.

Packaging Material Information

Details on the recyclable nature of product packaging materials.

Intended Use

Technical Specifications

Installation Guide

Installation Preparation and Responsibilities

General instructions and customer responsibilities for product installation.

Appropriate Installation Location

Guidelines for selecting a suitable and safe location for the washing machine.

Removing Packaging Reinforcement

Instructions on how to safely remove packaging reinforcement before installation.

Removing Transportation Locks

Steps to remove transportation safety bolts before operating the machine.

Water Connections

Connecting Water Supply

Instructions for connecting the water inlet hose and required pressure.

Connecting the Drain Hose

Guidance on connecting the drain hose to a waste outlet at the correct height.

Final Installation Steps

Adjusting the Feet

How to level and balance the machine using its adjustable feet.

Electrical Connection Requirements

Essential requirements for connecting the machine to a grounded electrical outlet.

Initial Use Preparation

Steps to take before the first use, including initial drum cleaning.

Preparing for Wash Cycles

Sorting the Laundry

Advice on sorting clothes by fabric type, color, and soiling level.

Preparing Laundry for Washing

Procedures for preparing clothes for washing, like removing items and treating stains.

Energy Saving Recommendations

Recommendations for efficient operation to save energy and water.

Loading the Laundry Correctly

Instructions on how to properly load laundry into the washing machine.

Understanding Load Capacity

Information on the maximum load capacity and automatic adjustment.

Detergent and Softener Usage

Special Detergent Handling

Liquid Detergent Handling

Specific instructions for using liquid detergents with or without a dedicated cup.

Gel and Tablet Detergent Use

How to use gel and tablet detergents in the machine's compartments or drum.

Starch Application Instructions

Instructions for using starch in the washing machine for specific fabric care.

Limescale Remover Use

Advice on using limescale removers specifically designed for washing machines.

Bleach and Decolorant Usage

How to safely use bleaches and oxygen-based decolorants in the machine.

Efficient Washing Tips

Operating the Washing Machine

Control Panel Overview

Explanation of the washing machine's control panel buttons and indicators.

Machine Preparation for Use

Steps to prepare the machine before starting a wash cycle.

Programme Selection and Tips

How to select wash programmes and tips for efficient washing.

Programme and Consumption Details

Main and Additional Programmes

Main Wash Programmes

Description of the primary wash programmes available on the machine.

Additional Programmes Explained

Explanation of various additional and special wash programmes.

Special Programmes and Spin Speed

Special Programmes

Details on special programmes like Rinse and Spin+Pump for specific needs.

Spin Speed Adjustment

How to adjust and select spin speeds, including the Rinse Hold function.

Delayed Start Functionality

Instructions for using the delayed start function to schedule programme startup.

Programme Control and Monitoring

Programme Start and Child Lock

Steps to start programmes, activate/deactivate child lock, and monitor progress.

Monitoring Programme Progress

How to track the status and progress of a running wash programme.

Mid-Cycle Operations

Door Lock and Mid-Cycle Adjustments

Door lock operation, pausing, changing settings, and adding/removing laundry.

Cancelling a Wash Programme

Steps to cancel a running programme and start a new one.

Programme End and Energy Saving

Maintenance and Cleaning Guide

Detergent Drawer and Drum Cleaning

Instructions for cleaning the detergent drawer, drum, and loading door.

Exterior Cleaning and Filter Maintenance

Guidance on cleaning the exterior, control panel, and water intake filters.

Draining Water and Pump Filter Care

Troubleshooting Common Issues

Programme Start and Selection Problems

Reasons and solutions for programme start failures and selection issues.

Water Intake and Drainage Problems

Troubleshooting for water intake, drainage problems, and water leaks.

Operational Anomalies

Reasons and solutions for vibration, machine stopping, and loading door lock issues.

Wash Time and Timer Issues

Extended Wash Times and Timer Issues

Reasons for extended wash times and timer malfunctions, with solutions.

Spinning and Performance Problems

Solutions for the machine not spinning and poor washing performance like graying or stains.

Specific Washing Performance Issues

Stain, Odor, and Color Issues

Troubleshooting for specific washing performance issues like oily stains, odors, and color loss.

Rinsing, Stiffness, and Softener Scent Problems

Reasons and solutions for inadequate rinsing, laundry stiffness, and absent softener scent.

Detergent Residue in Drawer

Reasons and solutions for detergent residue buildup in the dispenser drawer.

Foam and Wet Laundry Issues

Foam Formation and Overflow

Causes and solutions for excessive foam formation and overflow from the detergent drawer.

Laundry Remaining Wet After Cycle

Reasons and solutions for laundry remaining wet at the end of the programme.

Beko WTX71031W Specifications

General IconGeneral
TypeFront Load
Load Capacity7 kg
Energy Efficiency ClassA+++
Spin Speed1000 rpm
Weight62 kg
ColorWhite
Noise Level (Spinning)76 dB

Related product manuals