What to do if the Beko Washer programme cannot be started?
If your Beko Washer programme cannot be started or selected, the machine may have switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will be canceled.
How to fix a Beko WTX51021W Washer that won't drain?
If your Beko Washer is not draining water, try these solutions: * Check the water drain hose for clogs or twists; clean or flatten it. * Clean the pump filter.
Why won't my Beko Washer start after I close the door?
If your Beko Washer isn't starting after you close the door: * Make sure you've pressed the Start / Pause / Cancel button. * If the door is hard to close due to too much laundry, reduce the load and ensure the door is properly closed.
Why is my Beko WTX51021W not rinsing properly?
If your Beko Washer isn't rinsing well: * Ensure you're using the right detergent for your machine and laundry, and store it properly. * Make sure you're putting the detergent in the correct compartment. * Check the pump filter. * Check the drain hose.
What to do if my Beko WTX51021W is leaking water from the bottom?
If your Beko Washer is leaking from the bottom: * Check the water drain hose for clogs or twists, and clean or flatten it. * Clean the pump filter.
Why do my clothes smell bad after washing in my Beko WTX51021W?
If your clothes smell unpleasantly after washing in your Beko Washer, leave the detergent drawer and loading door ajar after each wash. This prevents a humid environment favorable for bacteria.
Why is there detergent residue in the drawer of my Beko Washer?
If your Beko Washer has detergent residue in the drawer: * Dry the detergent drawer before adding detergent. * Ensure the detergent hasn't gotten damp; keep detergents closed in a humidity-free environment and avoid excessive temperatures. * Check the water pressure. * Check the holes of the detergent compartment and clean if they are clogged. * If there is a problem with the detergent drawer valves, call the Authorised Service Agent. * Do not mix softener with detergent. Clean the dispenser with hot water. * Clean the drum regularly. For this, please see 4.4.2.
Why is my Beko WTX51021W Washer leaving laundry gray?
If your Beko Washer's washing performance is poor and laundry turns gray: * Use the recommended amount of detergent appropriate for water hardness and the laundry. * Select the proper temperature for the laundry. * Avoid using too much detergent. * Do not overload the machine; load with recommended amounts. * Select the correct programme and temperature. * Use original detergent appropriate for the machine.
Why is my Beko WTX51021W Washer immediately draining the water it takes in?
If your Beko Washer directly discharges the water it takes in, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.
Why does my Beko WTX51021W take so long to wash?
If your Beko Washer takes longer than expected, it could be due to: * Low water pressure: the machine waits for adequate water intake. * Low voltage: washing time is extended to ensure proper cleaning. * Low input water temperature: heating takes longer. * Increased rinsing: the machine may increase rinse water or add an extra rinse. * Excessive foam: the automatic foam absorption system may be activated due to too much detergent. In this case, use the recommended amount of detergent.
Safety instructions to prevent injuries and material damage risks.
Guidelines for safe use of the product by children and supervision requirements.
Instructions for safe electrical connections and usage to prevent electric shock.
Warning about hot loading door glass during high temperature washes.
Product compliance with WEEE Directive for recycling and disposal.
Information on recyclable packaging materials and their disposal.
Instructions and precautions for installing the washing machine.
Guidelines for selecting a suitable and safe location for the machine.
Steps for removing packaging reinforcement before installation.
Procedure for removing transportation safety bolts.
Instructions for connecting the water supply hose and checking for leaks.
Guidance on connecting the drain hose to waste water drain, lavatory, or bathtub.
How to adjust the machine's feet for stability and vibration reduction.
Requirements for connecting the machine to a grounded electrical outlet.
Steps to take before the first use, including drum cleaning.
Guidance on sorting laundry by fabric type, color, and soiling.
Instructions for preparing laundry items, removing foreign objects, and protecting the machine.
Tips for economical and energy-efficient use of the washing machine.
Instructions on how to load laundry into the machine correctly.
Information on determining and adhering to the maximum load capacity.
Guidance on using detergents, softeners, and their correct compartments.
Recommendations for efficient washing based on soiling level and fabric type.
Overview of the washing machine's control panel and button functions.
Steps to prepare the machine before operating, including connecting hoses and adding detergent.
Guidance on selecting the right program and tips for efficient washing.
Table detailing different wash programs, their capacities, consumption, and duration.
Description of primary wash programs for different fabric types.
Explanation of special or additional wash programs available on the machine.
Details on specific programs like Rinse, Spin+Pump, and their usage.
How to select and adjust the spin speed for different wash cycles.
Instructions on how to use the delayed start function for program initiation.
Steps to start the selected washing programme.
How to activate and deactivate the child lock feature to prevent accidental changes.
How to monitor the progress of a running wash program.
Explanation of the loading door locking mechanism and its function.
How to modify program settings, pause, or add/remove laundry during a cycle.
Instructions on how to cancel a running program and start a new one.
What to do when the washing program has finished.
Information about the automatic energy-saving pause mode.
Steps for cleaning the detergent drawer and siphon.
How to clean the loading door, drum, and check for blockages.
Instructions for cleaning the exterior body and control panel.
Procedure for cleaning the filters at the water intake valves and hoses.
How to drain residual water and clean the pump filter.
Troubleshooting steps when the program fails to start after closing the door.
Resolving issues where the program cannot be started or selected.
Explanation for water remaining in the machine after quality control.
Diagnosing why the machine enters standby or fails to take in water.
Troubleshooting steps for when the machine fails to drain water.
Solutions for vibration or noise issues during operation.
Identifying and fixing water leaks from the bottom of the machine.
Troubleshooting for unexpected program stops shortly after starting.
Explanation for the machine immediately discharging water.
Addressing the issue of no water visible in the machine during the wash.
Solutions for when the loading door cannot be opened.
Reasons and solutions for extended washing times.
Troubleshooting why the program time display is not counting down.
Resolving issues where the machine does not proceed to the spinning cycle.
Addressing laundry turning gray due to washing performance issues.
Solutions for persistent stains or lack of whitening in laundry.
Safety instructions to prevent injuries and material damage risks.
Guidelines for safe use of the product by children and supervision requirements.
Instructions for safe electrical connections and usage to prevent electric shock.
Warning about hot loading door glass during high temperature washes.
Product compliance with WEEE Directive for recycling and disposal.
Information on recyclable packaging materials and their disposal.
Instructions and precautions for installing the washing machine.
Guidelines for selecting a suitable and safe location for the machine.
Steps for removing packaging reinforcement before installation.
Procedure for removing transportation safety bolts.
Instructions for connecting the water supply hose and checking for leaks.
Guidance on connecting the drain hose to waste water drain, lavatory, or bathtub.
How to adjust the machine's feet for stability and vibration reduction.
Requirements for connecting the machine to a grounded electrical outlet.
Steps to take before the first use, including drum cleaning.
Guidance on sorting laundry by fabric type, color, and soiling.
Instructions for preparing laundry items, removing foreign objects, and protecting the machine.
Tips for economical and energy-efficient use of the washing machine.
Instructions on how to load laundry into the machine correctly.
Information on determining and adhering to the maximum load capacity.
Guidance on using detergents, softeners, and their correct compartments.
Recommendations for efficient washing based on soiling level and fabric type.
Overview of the washing machine's control panel and button functions.
Steps to prepare the machine before operating, including connecting hoses and adding detergent.
Guidance on selecting the right program and tips for efficient washing.
Table detailing different wash programs, their capacities, consumption, and duration.
Description of primary wash programs for different fabric types.
Explanation of special or additional wash programs available on the machine.
Details on specific programs like Rinse, Spin+Pump, and their usage.
How to select and adjust the spin speed for different wash cycles.
Instructions on how to use the delayed start function for program initiation.
Steps to start the selected washing programme.
How to activate and deactivate the child lock feature to prevent accidental changes.
How to monitor the progress of a running wash program.
Explanation of the loading door locking mechanism and its function.
How to modify program settings, pause, or add/remove laundry during a cycle.
Instructions on how to cancel a running program and start a new one.
What to do when the washing program has finished.
Information about the automatic energy-saving pause mode.
Steps for cleaning the detergent drawer and siphon.
How to clean the loading door, drum, and check for blockages.
Instructions for cleaning the exterior body and control panel.
Procedure for cleaning the filters at the water intake valves and hoses.
How to drain residual water and clean the pump filter.
Troubleshooting steps when the program fails to start after closing the door.
Resolving issues where the program cannot be started or selected.
Explanation for water remaining in the machine after quality control.
Diagnosing why the machine enters standby or fails to take in water.
Troubleshooting steps for when the machine fails to drain water.
Solutions for vibration or noise issues during operation.
Identifying and fixing water leaks from the bottom of the machine.
Troubleshooting for unexpected program stops shortly after starting.
Explanation for the machine immediately discharging water.
Addressing the issue of no water visible in the machine during the wash.
Solutions for when the loading door cannot be opened.
Reasons and solutions for extended washing times.
Troubleshooting why the program time display is not counting down.
Resolving issues where the machine does not proceed to the spinning cycle.
Addressing laundry turning gray due to washing performance issues.
Solutions for persistent stains or lack of whitening in laundry.
General| Door hinge | Left |
|---|---|
| Water fill | Cold |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Certification | CE, VDE, WEEE, RoHS, RAEE |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Illumination color | Amber |
| Appliance placement | Freestanding |
| Dispenser tray type | 3-way |
| Package type | Box |
| Current | 10 A |
| Connected load | 2200 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (off) | 0.25 W |
| Power consumption (standby) | 0.75 W |
| Water consumption per cycle | 46 L |
| Energy consumption washing per cycle | 0.73 kWh |
| Annual water consumption washing | 9679 L |
| Annual energy consumption washing | 148 kWh |
| Drum capacity | 5 kg |
| Cycle time (max) | 190 min |
| Delay start (max) | 9 h |
| Residual moisture | 62 % |
| Spin-drying class | C |
| Maximum spin speed | 1000 RPM |
| Minimum spin speed | 400 RPM |
| Noise level (spin) | 77 dB |
| Noise level (wash) | 63 dB |
| Number of washing programs | 15 |
| Cycle time (quick washing program) | 30 min |
Weight and Dimensions| Depth | 450 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 57000 g |
To Next Page
