Why won't my Beko Washer drain water?
If your Beko washer isn't draining water, the drain hose may be clogged or twisted. Another possibility is that the pump filter is clogged. Check and clean both to resolve the issue.
What to do if my Beko WTXS61032W Washer loading door won't open?
If the loading door of your Beko washer won't open, it could be due to several reasons: the door lock might be activated because of the water level, the machine might be heating or spinning, or the child lock may be engaged. You can drain the water by running the Pump or Spin programme, wait until the programme completes, or wait a couple of minutes for deactivation of the door lock. Also the loading door may be stuck because of the pressure it is subjected to, so try to grab the handle and push and pull the loading door to release and open it.
Why is my Beko WTXS61032W not switching to the spinning step?
If your Beko washer isn't switching to the spinning step, there might be an unbalanced load, the water might not be drained completely, or excessive foam might have occurred. The automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. Check the filter and the draining hose and use recommended amount of detergent.
Why doesn't my Beko Washer rinse well?
If your Beko washer doesn't rinse well, the amount, brand, and storage conditions of the detergent used might be inappropriate. The detergent could be put in the wrong compartment, or the pump filter or drain hose could be clogged or folded. Use a detergent appropriate for the washing machine and your laundry, keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures, put the detergent in the correct compartment and check the filter and the drain hose.
Why is my Beko Washer taking longer than usual?
The washing time might be longer than specified due to several reasons. The water pressure or voltage could be low. The input water temperature might be low, which extends the time needed to heat the water, or the machine might have increased the number of rinses or the amount of rinse water. Excessive foam due to too much detergent can also prolong the washing time.
What to do if my Beko Washer vibrates too much?
Excessive vibration or noise in your Beko washer can stem from several issues. Ensure the machine is level by adjusting the feet. Check the pump filter for any hard substances. Make sure the transportation safety bolts have been removed. The laundry quantity could be too little or too much, or the machine might be leaning on something. Try adjusting the load or repositioning the machine.
Why is there detergent residue in my Beko Washer drawer?
Detergent residue in the drawer of your Beko washer can occur if the drawer is wet when you add detergent, the detergent has gotten damp, or the water pressure is low. Also, the holes of the detergent compartment may be blocked, there may be a problem with the detergent drawer valves, detergent might be mixed with the softener or regular drum cleaning is not applied. Dry the drawer before adding detergent, ensure your detergents are stored properly, check the water pressure, check the holes and clean if they are clogged. For other problems call the Authorized Service Agent.
What causes too much foam in my Beko Washer?
Excessive foam in your Beko washer can be caused by using improper detergents, using too much detergent, or storing detergent improperly. Some meshed laundry items may also cause excessive foaming. Make sure you are using the correct detergent, using a sufficient amount of it, and that you are storing it properly. Put the detergent in the correct compartment. For other problems call the Authorized Service Agent.
Why is my Beko WTXS61032W Washer washing performance poor and laundry turning gray?
Poor washing performance resulting in gray laundry in your Beko washer can be due to several factors: using too little or too much detergent, washing at low temperatures for too long, using the wrong type of detergent, overloading the machine, or selecting the wrong programme and temperature. Use the recommended amount of detergent appropriate for water hardness and the laundry, select the proper temperature and programme, do not load the machine in excess and use original detergent appropriate for the machine.
Why is the programme time not counting down on my Beko WTXS61032W?
If the programme time isn't counting down on your Beko washer (on models with a display), the timer may stop during water intake, during the heating step, or during the spinning step. The timer indicator will not countdown until the machine takes in adequate amount of water or reaches the selected temperature. Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.
General| Type | Front Load |
|---|---|
| Capacity | 6 kg |
| Spin Speed | 1000 RPM |
| Dimensions (H x W x D) | 84 x 59.5 x 53.5 cm |
| Weight | 65 kg |
| Spin Drying Efficiency Class | C |
| Noise Level (Spin) | 74 dB |
| Depth | 44 cm |
| Programs | 15 |
| Color | White |
| Water Consumption | 44 L |
To Next Page
