Beko WTX71232WI User Manual

Beko WTX71232WI

60 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

2820525918_IT / 27-05-17.(15:14)

Lavatrice

Manuale utente

WTX71232WI

IT / EN

Numero del documento=

Washing Machine

User’s Manual

Table of Contents

Questions and Answers:

B
Bradley CordovaSep 12, 2025
Why is foam overflowing from the detergent drawer of my Beko Washer?
- M
  Michael AdamsSep 12, 2025
  If foam is overflowing from the detergent drawer of your Beko washer, you're likely using too much detergent. Mix 1 tablespoonful of softener with ½ liter of water and pour it into the main wash compartment of the detergent drawer. Also, put detergent into the machine suitable for the programmes and maximum loads indicated in the 'Programme and consumption table'. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.
A
April BrowningAug 25, 2025
Why programme cannot be started on Beko Washer?
- M
  Marissa PerkinsAug 25, 2025
  If your Beko washer programme cannot be started or selected, it might have switched to self-protection mode due to a supply problem such as line voltage or water pressure issues. To cancel the current programme, turn the Programme Selection knob to select another programme.
B
Billy MitchellAug 25, 2025
Why Beko Washer machine does not switch to spinning step?
- D
  Debra DelgadoAug 26, 2025
  If your Beko washer isn't switching to the spinning step, there might be an unbalanced load. The automatic unbalanced load detection system may be activated due to how the laundry is distributed in the drum. Also, the machine won't spin if the water isn't drained completely, so check the filter and the draining hose. Excessive foam from too much detergent can also prevent spinning.
S
scott99Aug 26, 2025
Why is there water leaking from the bottom of my Beko washing machine?
- W
  William HurleyAug 26, 2025
  If your Beko Washer is leaking water from the bottom, the water drain hose might be clogged or twisted; try cleaning or flattening it. The pump filter could also be clogged, so give that a clean as well.
N
Nichole AdkinsSep 12, 2025
Why does my Beko WTX71232WI Washer vibrate or make noise?
- J
  Joe BennettSep 12, 2025
  Your Beko Washer might be vibrating or making noise due to several reasons: * The machine might be standing unbalanced; adjust the feet to level it. * A hard substance might have entered the pump filter; clean the pump filter. * Transportation safety bolts are not removed; remove them. * The laundry quantity might be too little; add more laundry. * The machine might be overloaded; remove some laundry or distribute the load evenly. * The machine might be leaning on something; ensure it's not.
D
Dalton PriceSep 5, 2025
Why Beko WTX71232WI machine stopped shortly after the programme started?
- D
  Daniel BarnesSep 5, 2025
  If your Beko washer stops shortly after starting, it might have temporarily stopped due to low voltage. It should resume running once the voltage returns to normal.
C
Catherine GardnerSep 6, 2025
Why washing performance is poor and laundry turns gray in Beko WTX71232WI?
- A
  Alice PetersSep 6, 2025
  If your laundry turns gray after washing in your Beko washer, it could be due to using too little detergent over time, washing at low temperatures for too long, or using insufficient detergent with hard water. Using too much detergent, overloading the machine, selecting the wrong program and temperature, or using the wrong type of detergent can also cause this issue. Use the recommended amount of original detergent appropriate for water hardness and the laundry, and select the proper program and temperature.
J
Jay TaylorSep 1, 2025
What to do if my Beko Washer programme cannot be started or selected?
- H
  hughescrystalSep 1, 2025
  If the programme on your Beko Washer cannot be started or selected, it's possible that the machine has switched to self-protection mode due to a supply problem like line voltage or water pressure issues. To cancel the current programme, turn the Programme Selection knob to select another programme.
L
Luis BrownAug 30, 2025
Why is there water leaking from the bottom of my Beko WTX71232WI?
- J
  Jacob DayAug 30, 2025
  If you notice water leaking from the bottom of your Beko Washer, it could be due to a clogged or twisted water drain hose; try cleaning or flattening the hose. Another possible cause is a clogged pump filter, so try cleaning the pump filter as well.
N
Nicole AlvaradoAug 31, 2025
What to do if my Beko WTX71232WI Washer enters standby mode or does not take in water?
- J
  josephbeckerAug 31, 2025
  If your Beko Washer enters standby mode or doesn't take in water, check the following: * Ensure the tap is turned on. * Make sure the water inlet hose isn't bent; flatten it if it is. * Clean the water inlet filter if it's clogged. * Close the loading door completely. * Verify the water connection and ensure water isn't cut off; if it was cut off, press Start/Pause after water is restored to resume.

Beko WTX71232WI Specifications

General

Type	Front Load
Load Capacity	7 kg
Energy Efficiency Class	A+++
Spin Speed	1200 rpm
Color	White
Programs	15

Related product manuals

Preview: Beko WTX71232W

Preview: Beko WTX61031W

Preview: Beko WTX91032W

Preview: Beko WTX61032W

Preview: Beko WTX91232WI

Beko WTX91232WI

Preview: Beko WTX81432WI

Beko WTX81432WI

Preview: Beko WTXS61232WI

Beko WTXS61232WI

Preview: Beko WTX91486AI-IT

Beko WTX91486AI-IT

Beko WTX101486AI-IT

Preview: Beko WTB820E1W