To Next PageTo Next PageWhy is there water in my Beko WTXS61232WI Washer?
If you find water in your Beko Washer, some water might have remained in the product due to the quality control processes in the production. This is not a failure, and the water is not harmful to the machine.
Why is my Beko Washer vibrating and making noise?
There are several reasons why your Beko Washer might be vibrating or making noise: * The machine might be standing unbalanced. Adjust the feet to level the machine. * A hard substance might have entered the pump filter. Clean the pump filter. * The transportation safety bolts are not removed. Remove the transportation safety bolts. * The laundry quantity in the machine might be too little. Add more laundry to the machine. * The machine might be overloaded with laundry. Take out some of the laundry or distribute the load by hand to balance it. * The machine might be leaning on a rigid item. Make sure that the machine is not leaning on anything.
Why is there too much foam in my Beko Washer?
Excessive foam in your Beko Washer can be caused by: * Using improper detergents for the washing machine. Use detergents appropriate for the washing machine. * Using an excessive amount of detergent. Use only a sufficient amount of detergent. * Storing detergent under improper conditions. Store detergent in a closed and dry location, not in excessively hot places. * Some meshed laundry such as tulle may foam too much because of their texture. Use smaller amounts of detergent for this type of item. * Putting detergent in the wrong compartment. Put the detergent in the correct compartment. * Softener is being taken early. There may be a problem in the valves or in the detergent dispenser. Call the Authorised Service Agent.
Why does washing take longer than specified in the manual on my Beko WTXS61232WI?
Several factors can cause your Beko Washer to take longer than the time specified in the manual: * Low water pressure: The machine waits until taking in an adequate amount of water. * Low voltage: Washing time is prolonged to avoid poor washing results. * Low input water temperature: The time to heat up the water extends. * Increased number of rinses or amount of rinse water: The machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary. * Excessive foam: The automatic foam absorption system might have been activated due to too much detergent usage. Use the recommended amount of detergent.
Why does the program time not countdown on my Beko Washer?
The timer on your Beko Washer may not countdown if: * It stops during water intake: The timer indicator will not countdown until the machine takes in an adequate amount of water. * It stops during the heating step: The timer indicator will not countdown until the machine reaches the selected temperature. * It stops during the spinning step: The automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.
Why is the washing performance poor and laundry turns gray with my Beko WTXS61232WI?
Poor washing performance resulting in gray laundry in your Beko Washer can be due to: * Insufficient detergent used over a long period: Use the recommended amount of detergent. * Washing at low temperatures for a long time: Select the proper temperature. * Insufficient detergent with hard water: Use the recommended amount of detergent. * Too much detergent used: Use the recommended amount of detergent. * Excessive laundry loaded: Do not overload the machine. * Wrong program and temperature selected: Select the proper program and temperature. * Wrong type of detergent used: Use original detergent appropriate for the machine.
General| Type | Front Load |
|---|---|
| Capacity | 6 kg |
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 84 x 60 x 54 cm |
| Programs | 15 |
| Color | White |
| Noise Level (Washing) | 58 dB |
| Noise Level (Spinning) | 76 dB |
