The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2012 Belden Wire & Cable B.V.
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use. For devices with embedded software, the end-user license agreement on the
enclosed CD applies.
The performance features described here are binding only if they have been expressly agreed
when the contract was made. This document was produced by Belden Wire & Cable B.V.
according to the best of the company's knowledge. Belden reserves the right to change the
contents of this document without prior notice. Belden can give no guarantee in respect of the
correctness or accuracy of the information in this document.
Belden can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
You can get the latest version of this manual on the Internet at the Belden product site
(www.beldensolutions.com).
Printed in The Netherlands
Belden Wire & Cable B.V.
Edisonstraat 9
5928 PG Venlo
Netherlands
Tel.: +31 773 878 555
5.1.12
To Next Page
Loading...
