Siebe/Barber
Aux
Direct couple the Belimo where shaft is available.
Some were direct coupled.
FSTF <1.5 sq.ft. FSLF <4
sq.ft.
FSNF <12 sq.ft. FSAF*A <18 sq.ft.
For Pottorff with shaft spring see:
https://www.belimo.us/mam/americas/technical_documents/pdf-
web/fire_and_smoke_doc/pottorff-ma2xx_to_belimo.pdf
Motor was not 90 degree and pulley and cable were usually
used. Some geometric changes are necessary to simplify.
Provide photos. Motor, linkage, blades, fusible link, McCabe ©
Link, Typically direct couple to damper shaft if available.
Otherwise, investigation necessary.
Air Balance Honeywell ML&MS Types to Belimo FSxx March 2018
7