27
ADDITIONAL CAPABILITIES
Media Server by myTwonky
Media Server by myTwonky lets your Router stream music, movies,
and photos to different DLNA/UPnP devices on your network.
In order to use Media Server by myTwonky, you will need to insert
a USB storage device with media content into a free USB port
on the back of your Router. Your Router will begin to make your
content available to other devices on your network automatically.
If you want to configure Media Server by myTwonky, visit
http://router/ and choose “Media Server.”
There are several settings in the configuration page:
DLNA Server: Enables or disables your media server
Server Name: The name under which other devices will see
your content
Refresh: Re-scans your USB storage devices for
media content
Shared Drives: Shows information about and status of each of your
attached drives. You can see the name of the drive,
its capacity, and whether media is being served from
it or not.
When you click “Save,” your Router will save your changes.
To Next Page
Loading...
Need help?
General
