38
USING YOUR ROUTER
38
Updating the Router’s Firmware
via the Web Interface
The following steps show you how to update your Router’s
firmware using its web interface. You do not need to be connected
to the Internet as this interface is built into the Router itself.
Setup steps:
1. Locate and download the firmware file from the Belkin
support site. (Type your part number into the search box in
the top right corner and look for “Firmware” in the title.)
2. Save the file to a location on your computer where
you can get to it easily, such as your desktop.
3. Connect the computer to one of the four LAN
ports on the Router (refer to image).
4. Open a web browser on the computer.
5. In the address bar of the web browser, type “http://router” or
“http://192.168.2.1” and press “Enter” on your keyboard.
To Next Page
Loading...
Need help?
General
