Getting to Know Your Router
Front Panel
Router Status Light (A)
•
Off: The router is not plugged into a power source.
•
Blinking Blue: The router is starting up.
•
Solid Blue: The router is connected to the Internet.
•
Blinking Amber: The router can’t detect the modem. Either the modem is off, is not plugged into
the router, or is unresponsive.
Wi-Fi Protected Setup (WPS) Light and Button (B)
The WPS button on the front of your router can be used to help establish a secure connection between
your router and other WPS-enabled Wi-Fi devices such as computers. To use WPS, refer to page
10
.
The small light near the WPS button shows what is happening while you are using WPS to establish a
connection.
•
Off: Idle
•
Blinking Blue: The Router is listening for a WPS-enabled computer or other device.
•
Solid Blue: The Router has made a secure connection with the computer or other device.
•
Amber: A connection was not created.
24
To Next Page
Loading...
Need help?
General
