5.
In the address bar of the web browser, type “http://router” or “http://192.168.2.1” and press
Enter on your keyboard.
6.
Click on Firmware Update toward the bottom right corner.
7.
Click Choose File toward the middle of the screen to search for the file you saved previously.
8.
Select the firmware file by left-clicking on it and then click Open in the lower-right corner of the
window. This will take you back into the router’s interface.
Note—The firmware version in the image above is depicted as an example. Your file name will
vary depending on your model and version.
9.
Click Update.
10.
Click OK when you see a prompt asking, “Are you sure you want to continue with upgrading?”
29
To Next Page
Loading...
Need help?
General
