Using the Web-Based Advanced User Interface
For “Encryption Technique”, select “TKIP”, “AES”, or “TKIP+AES”. This
setting will have to be identical on the wireless clients that you set up.
Enter your pre-shared key (PSK). This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be used on
all of the wireless clients that you set up. For example, your PSK might be
something like: “Smith family network key”. Click “Apply Changes” to finish.
You must now set all wireless clients to match these settings.
Make sure your wireless computers are updated to work with WPA2
and have the correct settings to get proper connection to the Router.
To Next Page
Loading...
