Belkin Wireless G Plus MIMO Router F5D9230-4 - Page 87

83
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
4.
You will be asked if you are sure you want to continue. Click “OK”.
5.
You will see one more message. This message tells you that the
Router may not respond for as long as one minute as the firmware is
loaded into the Router and the Router is rebooted. Click “OK”.
6.
A 60-second countdown will appear on the screen. When the
6. A 60-second countdown will appear on the screen. When the 6.
countdown reaches zero, the Router firmware update will be
complete. The Router home page should appear automatically. If
not, type in the Router’s address (default = 192.168.2.1) into the
navigation bar of your browser.