Belkin Wireless G Plus MIMO Router F5D9230-4 - Page 97

93
Manually Configuring Network Settings
section
1
9
2
3
4
5
6
7
8
10
5.
If “Use the following IP address”
(2)
is selected, your Router will
need to be set up for a static IP connection type. Write the address
information the table below. You will need to enter this information
into the Router.
6.
If not already selected, select “Obtain an IP address automatically”
(1)
and “Obtain DNS server address automatically”
(3)
. Click “OK”.
Your network settings are now configured for use with the Router.