A. Unplug your modem’s power
cord. Put the Router next
to the modem. Raise the
Router’s antennas.
B. Locate the networking cable
that connects your modem and
computer. Unplug that cable
from your modem, and plug it
into any gray port on the back
of the Router.
C. Find your new networking cable
(included in the box with your
Router) and connect it to the
yellow port on the back of the
Router. Connect the other end
to your modem, in the port
that’s now free.
D. Plug in your modem’s power
cord. Wait 60 seconds for the
modem to start up. Plug the
Router’s power supply into
the black port on the back.
Plug the other end into the
wall outlet.
E. Wait 20 seconds for the Router
to start up. Look at the display
on the front of the Router.
Make sure the “Wired” and
“Router” icons are lit up in
blue. If they are not, recheck
your connections.
To Next Page
Loading...
Need help?
General
