Belling BI60FP - Anti-Stain Trim (if Fitted); Edging Strip (if Fitted)

INSTALLATION
Anti-stain trim (if tted)
Theanti-staintrimisfactoryttedto
the edges of the appliance front frame.
This trim provides the cabinetry with
extra protection from any escape of heat.
- When Installing the product, ensure
the anti-stain trim is correctly located
on the edges of the front frame, before
positioning and securing the appliance to
the cabinet.
-Whensecuringtheappliance,thexing
screws provided are driven through the
anti-stain trim into the cabinet.
Note:Whensuppliedtheanti-staintrim
may be loose and is only supported by
plastic rivets. The anti-stain trim will be
securedwhenthexingscrewsarefully
home into the cabinet. The plastic rivets
should not be removed.
Edging strip (if tted)
Theedgingstripisfactoryttedto
the edges of the appliance front frame.
This strip provides the cabinetry with ex-
tra protection from any escape of heat.
When installing the product, ensure
that the edging strip is correctly located
on the outer edges of the front frame,
before positioning and securing the
appliance to the cabinet.
Whensecuringtheappliance,thexing
screws provided are driven through the
edging strips into the cabinet - the seal
willstraightenupandsitushtothe
cabinet when the screws are fully home.