Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure)
and the adjustment of the appliance are compatible. The adjustment conditions are stated on the data
badge.
This appliance is not connected to a combustion evacuation device. It shall be installed and connect-
ed in accordance with current installation regulation. Particular attention shall be given to the relevant
requirements regarding ventilation.
In your own interest and that of safety, it is the law that all gas appliances be installed and serviced by
competent persons. GAS SAFE registered installers undertake to work to satisfactory standards.
Where regulations or standards have been revised since this handbook was printed, always use the
latest edition.
WARNING: Servicing shall be carried out by authorized personnel
Gas Safety (Installation & Use) Regulations
This appliance must be installed by an authorised person in accordance with the Australian Gas Instal-
lation Standard AS/NZS 5601, the manufacturers installation instructions, local gas tting regulations,
and any other relevant statutory regulations.
Particular attention should be given to relevant requirements regarding ventilation.
Ventilation Requirements
Ventilation must be as specied by AS/NZS 5601 Installation code. The room containing the appliance
should have an air supply.
An appliance should be installed in a location for complete combustion of gas, proper ueing and to
maintain ambient temperature of the immediate surrounding at safe limits, under normal conditions.
Windows and permanent vents should therefore not be blocked or removed without rst consulting a
GAS SAFE or local accredited gas installer.
REGULATIONS AND STANDARDS
To Next Page
Loading...
