Do you have a question about the Belling ELECTRIC RANGE and is the answer not in the manual?
General safety checks and preparations before initial product use.
Warnings about hot surfaces and specific instructions for keeping children away from the appliance.
Safe practices and prohibitions for operating the oven and grill functions.
Lists actions that must not be performed on the hob to ensure safety.
Do's and Don'ts for safe and effective hob operation.
Additional safety prohibitions and warnings for hob usage.
Specific steps to take if a pan catches fire during cooking.
Safety advice for deep-fat frying and procedures for electrical fires.
Safe practices for operating the induction hob, including warnings.
General information on induction technology and requirements for cookware.
Instructions on turning the hob on/off and selecting cooking zones.
Details on ON/OFF switch, Low Temperature Setting, Pause Key, and Recall functions.
Explanation of the Power Boost feature and how to adjust power settings.
How to use the minute minder and set the automatic switch-off timer.
Warning about the dangers of leaving the hob unattended while in use.
Detailed explanation of the pan detection feature and its indicators.
Explanation of residual heat indicators and the overheat protection system.
Explanation of different grill types and how to adjust grilling results.
Safety precautions and instructions on how to turn on the top oven.
Guidance on shelf positions, cooling fan, and preheating the top oven.
Details on recommended cooking times and temperature settings for the top oven.
Safety notes and instructions for switching on the main oven.
Warning about placing food or dishes on the oven base to prevent overheating.
Steps for starting and operating the grill, including door usage.
Troubleshooting common issues encountered when baking fruit cakes.
Troubleshooting common issues encountered when baking sponge cakes.
Specifies minimum distances for cupboards, hoods, and side opening doors.
Details on connecting the power cable to the appliance's terminal block.
Troubleshooting steps for power failures and operational problems.