Belling ELECTRIC RANGE - HOB SAFETY FEATURES AND PAN SIZING; RESIDUAL HEAT AND OVERHEAT PROTECTION

USING THE HOB - INDUCTION
Pan Sizes
Cook Zone
Smallest
Recommended
Pan Diameter
LHF 145 mm
LHR 145 mm
RHF 180 mm
RHR 145 mm
Residual Heat indicators
If when the cook zone is switched off the
glass surface is above 60°C , H will be dis-
played in the cook zone display until the
glass surface drops below approx 55°C.
This feature not only warns you against
hot surfaces but also indicates that there
is residual heat which can be used as
temporary warm zone.
Note - The cook zone itself does not heat
up, but the ceramic glass does get hot
because of the hot pan conducting heat
back onto the hob glass.
Overheat Pan Protection
The hob is equipped with additional safety
systems that help to prevent cookware
from overheating, providing an additional
level of safety not available on conven-
tional hobs (such as gas and ceramic
hobs).
Note - The safety temperature control
of the pans is only possible with quality
atbottomedpanssuitableforinduction
cooking. Poor quality pans can create
air gaps between the glass and the pan,
which affects the accuracy of the tem-
perature control.