To set Timer to switch ON & Step 6 Turn off the oven control
OFF Automatically (Continued)
Step 7 Press the button to cancel the bleeping
(If 2 minutes has not elapsed)
Press button again to return to manual operation.
Other Notes On Timer 1. When cooking Automatically the cook period can be checked at Operation
any time simply by pressing the “ “ button.
2. When cooking Automatically the stop time can be checked at any time
simply by pressing the “ “ button. (This also can be altered at any time
by following Step 4 previously).
3. Having set a cooking period and stop time an electronic device stores the
information. The device within the timer will switch the oven on at the
required start time.
4. If a mistake is made and is not easily rectified, alter the cook period to show
0.00 (As per step 3 above) then press the “ “ button (See step 7
above).
5. After an automatic sequence the bleeping sound can be switched off by
pressing any of the following three buttons.
However, the large oven cannot be operated until the timer has been set to
manual. Press the Button (See Step 7 above).
6. If at any time the display shows three flashing zeros 0.00. It is likely that the
electricity supply to the oven has been interrupted. Reset the timer to the
correct time of day. If there is any food in the oven, make sure that it has
been cooked thoroughly before serving.
7. To give yourself more time to set each function press and hold the required
function button and at the same time press “ + “ or “ - “ button.
Note: Between the hours of 10.00 p.m. and 6.00 a.m. the intensity of the display
reduces.
Timer Instructions
To Next Page
Loading...
