EasyManua.ls Logo

Belling Db1000DF - Page 33

Belling Db1000DF
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Nothing Works.
Is the main cooker wall switch turned on?
Is the timer working? If the timer is not working it is likely that there is
no electricity supply to your cooker.
Large oven does not work.
Small oven working OK!
Ensure timer is set to manual.
(Refer toTimer Instructions‟ pages 14-18 )
Ensure the multifunction control is set to the required position.
Ignition failure
If all burners fail to ignite, check that sparks appear at the burners, a
clicking noise should be heard. If not first check that:
The electricity supply is turned on.
The mains cooker switch on the wall is in the ON position.
If only a hotplate burner is failing to light check that:
The burner cap and ring are fitted correctly.
The holes in the burner ring are not blocked.
The five hotplates may be lit with a match in the event of ignition
failure or power cut to the electricity supply.
Cooking Results Not Satisfactory?
PROBLEM
CHECK
GRILLING
Uneven cooking front to
back
Ensure that the grill pan is positioned centrally below the
grill burner.
Fat Splattering
Ensure that the grill is not set at too high a setting.
34

Related product manuals