Belling FSDF60DO - Gas Hob Cleaning

CLEANING
12.200
GAS HOB
Burner caps and heads
• The slots in the burner head where
theamesburnshouldbeclearedof
deposits.
• Clean with a nylon brush, rinse and
then dry thoroughly. There may be
brown coloured markings on your
burners; these are carbon deposits or
fat stains and can be removed using
asoaplledpad.
• Do not put burners in the dishwasher
or soak them. Using dishwasher pow-
ders,washingupliquidsandcaustic
pastes can damage the burners.
• Burner caps and heads must be
repositioned correctly so that they
sitsquarelyontothehobasshown.
This is particularly important with
stainless steel models as failure to re-
position the caps correctly may result
in discolouration of the stainless steel
around the burners.
Cast iron griddle or pan supports (if
tted)
• Ensure the griddle has fully cooled
and scrape off any stubborn marks
and bits of food with a plastic or
wooden cooking implement. Rinse in
warm soapy water and dry with a
tea towel.
• Do not clean in a dishwasher.
• If you notice any rusting on your
griddle, or pan-supports, simply clean
in warm soapy water, then re-season.
• Toseason:Heatthegriddlefor
30 seconds at a medium setting then
switch off. Use a minimum amount
of unsalted vegetable oil, on a dry
cloth or paper towel, and apply a thin
coat of oil to the element surface.
Wipe off the excess and re-heat the
griddle for one minute.
incorrect
burner cap not central
incorrect
angled
correct
parallel
burner cap
burner head