USING THE HOB
Warnings
glass surface is cracked, as electrical
parts are directly beneath. Switch off
the appliance at the supply to prevent
electric shock and contact your
supplier.
use. DO NOT TOUCH
Using Rotary Controls
place the pan on and turn the control
knob to the power setting you wish to
use.
knob to the ‘off’ position.
Notes on use
not indicate any set temperature and
cannot be used to judge one element
against another.
cycle on and off. This is to prevent the
hob from overheating.
The hot hob light will come on when one
of the hotplates is switched on. It will
remain on for a short time after the last
element has been switched off to serve as
a reminder that the hob top may still be
warm to the touch.
To Next Page
Loading...
