USING THE HOB - METAL SOLID PLATE
should be primed and seasoned - refer to
the instructions in the cleaning section.
Turn the selected hotplate control knob
clockwise or anticlockwise, depending on
by its central red spot. A high speed hob
ring has a faster response time. To switch
off, return the control knob to the “off”
position.
Using the hob
Do not operate the hotplate elements
without a pan on, or leave them running
after removing a pan.
The electric hob uses a sealed hob
system where heat is transferred by
conduction.
Decorative covers should not be used
over the hotplates as these can trap
moisture and cause intense heat.
check that all controls are in the off
position.
To Next Page
Loading...
