CLEANING
GENERAL
regularly as a build up of fat can
affect its performance or damage it
and may invalidate your guarantee.
allow it to cool down before you clean
any part of it.
containing chlorides, wire wool or
abrasive cleaners on aluminium,
stainless steel, or plastic/painted parts
as they can damage the appliance.
Nylon pads can also be unsuitable.
symbols on fascia panels. Excessive
cleaning can lead to the symbols fading.
Painted & Plastic parts
hot soapy water.
“Cif”, wire or nylon cleaning pads on
these parts.
Stainless steel & Aluminium surfaces
hot soapy water, and dry with a soft
cloth.
a stainless steel cleaner. Supplies can
be purchased from the Customer Care
Centre.
stainless steel, but will become less
noticeable with time.
care to avoid burning your hands.
fruit juices and especially salt - they
can mark or damage the metal if they
are left on the surface.
a few drops. Don’t use cooking oils
as they can contain salts, which will
damage the metal.
Enamel surfaces & parts
clean cloth.
disappear, you can use a mild cream
cleaner to remove them. More
stubborn marks can be removed using
towel or cloth.
Glass parts
hot soapy water, or a specialist glass
cleaner.
dry with a soft cloth.
they will scratch and damage the glass.
Chrome plated parts
in a dishwasher.
To Next Page
Loading...
