CLEANING
ELECTRIC HOB
Ceramic glass hobs
using a clean, damp cloth or kitchen
paper. Please ensure that the
elements are cooled fully to avoid
steam burns.
cleaner to restore the surface, but use
sparingly to avoid coating the hob top
too thickly. Too much cream cleaner
will lead to discolouration. Use a dry,
clean cloth to polish the surface.
scraper can be used.
or minerals from accumulating on
your hob and discolouring the glass.
-
sible, this will prevent any build up of
Solid plate hobs
the solid plate, making sure that
you follow the circular grooves and
avoid damaging the red spots. Make
sure that you allow the hotplate to
dry before use by switching on the
elements at a low heat.
a solid plate cleaner but take care to
avoid the red spots on elements.
To prime: Switch on each element in
turn for a short while (with no pan on
it) at a medium - high setting. This
will harden and burn off the coating.
To season: Heat the element for 30
seconds at a medium setting then
switch off. Use a minimum amount of
unsalted vegetable oil, on a dry cloth
or paper towel, and apply a thin coat
of oil to the element surface. Wipe off
the excess and heat the element for
one minute.
To Next Page
Loading...
