EasyManua.ls Logo

Belling FSE 54 DO - Changing Light Bulbs

Belling FSE 54 DO
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CUSTOMER CARE
CHANGING LIGHT BULBS

Warning: There is a risk of electric
shock, so always make sure you have
turned off and unplugged your appliance
before starting. Always allow the product
to cool down before you change a bulb.
Not all appliances have the same number
and type of bulbs. Before replacing your
bulb, open the oven door and see which
type you have. Then use the table to help
you change your bulb correctly.
Bulbs can be purchased from hardware
stores (always take the old bulb with you).
Please remember that bulbs are not

No of Lamps Bulb location Oven Type Instructions
2 Side All Remove the oven shelves. Grasp the

it away from the side of the oven.
Unscrew the bulb and replace. Replace
the lens cover
1 Rear Fanned/Multifunction Remove the oven shelves. Remove the
loose oven back by unscrewing the 4
securing screws (one at each corner)
and remove. Unscrew the lens cover by
turning anticlockwise. Remove the bulb
and replace. Replace the lens cover
and oven back.
1 Rear Conventional Remove the oven shelves. Unscrew the
lens cover by turning anticlockwise.
Remove the bulb and replace. Replace
the lens cover.

Other manuals for Belling FSE 54 DO

Related product manuals