What to do if user interface microcontroller fault occurs on Belling IH60R Hob?
If you encounter a user interface microcontroller fault on your Belling hob, allow the hob to cool, turn the controls to the off position, and then turn the power off and back on to reset the system.
How to troubleshoot user interface temperature sensor error on Belling IH60R?
If you encounter a user interface temperature sensor (NTC) error on your Belling hob, allow the hob to cool down, turn the controls to the off position, and then turn the power off and back on to reset the system.
How to address knob control limits fault on Belling IH60R Hob?
If your Belling hob displays a knob control limits fault, turn the controls to the off position, then turn the power off and back on to reset the system.
How to fix a knob control fault on a Belling IH60R Hob?
If your Belling hob displays a knob control fault, turn the controls to the off position, then turn the power off and back on to reset the system.
What causes user interface overtemperature on Belling IH60R?
If you are experiencing a user interface overtemperature error on your Belling hob, remove any hot pans from the display areas and allow the hob to cool down.
What to do if Belling IH60R indicates control knob left on?
If your Belling hob indicates that a control knob has been left in the on position, turn the control knob to the off position to reset it.
Why does my Belling IH60R Hob say no pan?
If your Belling hob indicates 'no pan' or 'unsuitable pan,' make sure you're using the correct pan size and that it's designed for induction cooking.
Essential safety precautions and warnings for safe operation of the appliance.
Guidance on preventing kitchen fires and actions to take if a fire occurs.
Tips to prevent damage and procedures for appliance disposal.
Instructions for safe and effective operation of the hob surface.
Overview of induction technology, auto tuning, and basic controls.
Details on griddle zone, pan detection, cookware, and overheat protection.
Covers residual heat indicators, auto standby, and common troubleshooting.
Cleaning instructions for ceramic glass hob surfaces.
Cleaning and maintenance guidelines for solid plate hobs.
Essential general information and safety for installation.
Specifies minimum distances, clearances, and cabinet requirements.
Instructions for fitting the hob into the worktop and sealing.
Details on securing the hob and connecting to the power supply.
Specific power ratings for each cook zone.
Information on the web shop for accessories, spares, and cleaning products.
Contact details, model/serial number location, and service record section.
General| Type | Induction Hob |
|---|---|
| Width | 60 cm |
| Number of Zones | 4 |
| Total Power | 7.4 kW |
| Control Type | Touch Control |
| Boost Function | Yes |
| Child Lock | Yes |
| Residual Heat Indicator | Yes |
| Timer | Yes |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Safety Features | Overheat Protection |
To Next Page
