Belrobotics PARCMOW - Page 17

17
B
B
E
E
L
L
R
R
O
O
B
B
O
O
T
T
I
I
C
C
S
S
II. Settings
The “SETTINGS” menu and its 7 sub-menus allow you to adjust several settings in order to
adapt and configure your Belrobotics robot to your needs. Below you will find explanations
of the 7 sub-menus.
1. RESTS SETTINGS
This sub-menu allows you to programme up to 4 rest periods during which your robot will
not work. It will remain at the charging station instead.
1. Enter the time (in hours and minutes) at which you want the rest period to begin,
then the time at which you want the rest period to end using the 0 to 9 numeric keys.
Confirm by pressing #.
2. Use the F2 and F3 keys to move on to
the days of the week and  to select
the days when you don’t want your
robot to work. Confirm by pressing #.
3. When "REST RANGE 2" is displayed,
repeat the steps described above as
necessary.
4. Once all of the rest periods have
been programmed, press C several
times to return to the "MENU" page.
Note: Rests settings during the night
In order to programme a rest period which spans across midnight (00:00) you must
programme two rest periods, as the rest range covers two separate days.
Example 1: The robot rests from 9pm on Monday and starts working again the following
day at 6am.
Example 2: A two-hour rest period every night during the week starting at 11pm because
an automatic sprinkler system is in use.
Rest range 1# : _ _ : _ _ → _ _ : _ _
□Mon□Tue□Wed□Thu□Fri□Sat□Sun
Rest range 2# : _ _ : _ _ → _ _ : _ _
□Mon□Tue□Wed□Thu□Fri□Sat□Sun
□Lu □Ma □Me □Je □Ve □Sa □Di
Rest range 3# : _ _ : _ _ → _ _ : _ _
□Mon□Tue□Wed□Thu□Fri□Sat□Sun
Rest range 4# : _ _ : _ _ → _ _ : _ _
□Mon□Tue□Wed□Thu□Fri□Sat□Sun
Rest range 1#: 2 1 : 0 0 → 0 0 : 0 0
□Mon □Tue □Wed □Thu □Fri □Sat □Sun
Rest range 2#: 0 0 : 0 0 → 0 6 : 0 0
□Mon □Tue □Wed □Thu □Fri □Sat □Sun


Rest range 1#: 2 3 : 0 0 → 0 0 : 0 0
□Mon □Tue □Wed □Thu □Fri □Sat □Sun
Rest range 2#: 0 0 : 0 0 → 0 1 : 0 0
□Mon □Tue □Wed □Thu □Fri □Sat □Sun









