These measures are crucial to ensuring your safety. However, the aforementioned
recommendations are not exhaustive: use your robot with care at all times.
- Never connect external electrical parts to the battery cable.
- Never remove the batteries from the robot to charge them: always use the charging
station.
- Never use other methods to charge the batteries (e.g. car battery chargers etc.).
These measures are vital to ensure the batteries function correctly and to keep your
warranty.
D. MAINTENANCE AND STORAGE
- Carry out maintenance on your robot as per the instructions: regular maintenance will
keep your robot in top condition, optimise its performance and extend its life.
- Disconnect the electricity supply before carrying out any maintenance work on the
charging station.
- Always make sure the robot’s main switch is in the OFF position before carrying out any
maintenance work on the robot.
- Check the tightness of the screws joining the main parts together on a regular basis.
- Your robot is an electrical appliance: never clean it with water.
- Wear protective gloves when carrying out maintenance work on the cutting heads.
- Always replace old parts with spare parts supplied by Belrobotics in order to maintain
the same level of effectiveness and safety.
Failure to adhere to these recommendations may result in damage to your robot or even
place you at risk of serious injury.
E. LIABILITY
- Belrobotics refuses all liability in cases where the robot is used in a way which is not
in accordance with the instructions provided.
- Do not modify your robot without prior agreement from Belrobotics. Any
unauthorised modification could render your robot dangerous and could lead to
serious injury when used.
- In addition to the risk to the user, the use of “generic” spare parts renders the
warranty null and void in the case of any damages which may occur as a result.
Belrobotics refuses all liability in case of accidents caused by the use of a “generic” spare
part.
To Next Page
Loading...
